Mile Marker HI10500 Hydraulic Winch

Mile Marker HI10500 Hydraulic Winch

Mile Marker's innovative design in its hydraulic winch focused on reliable power supply over the battery power used by its competitors. This makes the Mile Marker HI10500 a valuable investment to off-road trucks. Unlike a battery powered recovery winch, the HI10500 can operate even when the vehicle is turned off. The HI10500 hydraulic winch was intended for permanent mounting in the front or rear of any vehicle and requires a vehicle specific 35-series winch adapter kit. The Mile Marker HI10500 Hydraulic Winch is tried and tested on the most extreme environment and punishing situations. Shop for Mile Marker Hydraulic Winch Adapter Here

  • Freespooling
  • Mechanical Lock
  • Sealed Against the Elements
  • Can Use Underwater
  • Corrosion Resistant
  • Stainless Steel tie bars and fastener
  • 2 Speed
  • Integrated Solenoid Valve
  • 100 Feet Galvanized Aircraft Cable
10,500 lb. Hydraulic 12V Winch 2-Speed
  - MILEM-75-50050C
Price: $1,774.03
Sale Price: $1,321.66
 

10,500 lb. Hydraulic 24V Winch 2-Speed
  - MILEM-75-50050C/24
Price: $1,788.28
Sale Price: $1,332.27
 

HI10500 Specifications
Gear Train Planetary
Gear Ratio 6:1
Motor 9k: 14 cubic inch, 10.5k: 17.9 cubic inch, 12k: 19.5 cubic inch
Control Pendant Illuminated Joystick Remote, 12'
Cable 3/8" X 100' (nominal 14,400 lbs) (9.53 mm X 30.5 m)
Drum Size: 2.5" X 9" (63.5 mm X 228.6 mm)
Net weight HI9000, HI10500: 103 lbs (47 kgs), HI12000: 110 lbs (50 kgs)
Bolt Pattern 4 Bolt Pattern, 4.5" X 10", (114.3 mm X 254 mm)
Power Steering Min. Requirements: 3.5 GPM @ 1500 psi (13.25 L/m @ 103.4 bars)
HI10500 Performance
3.5 GPM @ 1500 PSI (13.25 L/m @ 103.4 bars)
Layer of Cable 1 2 3 4
Line speed-low gear (FPM) 5.65 6.43 7.41 8.58
Rated pull (lbs.) 10,500 8,500 7,400 6,400
Line speed-high gear (FPM) 31 36 42 48
Rated pull (lbs.) 1,600 1,300 1,200 1,000