Truxedo Lo Pro QT Tonneau Covers

Truxedo Lo Pro QT Tonneau Covers tonneau covers lowest prices
Chevy GMC TruXedo Lo Pro QT Tonneau Covers
Find your product here:
Dee Zee Invis-A-Rack Chevy GMC
Find your product here:
Dodge TruXedo Lo Pro QT Tonneau Covers
Find your product here:
Ford TruXedo Lo Pro QT Tonneau Covers
Find your product here:
Honda TruXedo Lo Pro QT Tonneau Covers
Find your product here:

Product Specs:

Hummer - Truxedo Lo Pro QT Harley Davidson - Tonneau Covers
Find your product here:

Product Specs:

Isuzu TruXedo Lo Pro QT Tonneau Covers
Find your product here:

Product Specs:

Jeep Truxedo Lo Pro QT Tonneau Covers
Find your product here:

Product Specs:

Mazda TruXedo Lo Pro QT Tonneau Covers
Find your product here:

Product Specs:

Mitsubishi TruXedo Lo Pro QT Tonneau Covers
Find your product here:

Product Specs:

Nissan TruXedo Lo Pro QT Tonneau Covers
Find your product here:

Product Specs:

Suzuki TruXedo Lo Pro QT Tonneau Covers
Find your product here:

Product Specs:

Toyota TruXedo Lo Pro QT Tonneau Covers
Find your product here:
Dee Zee Invis-A-Rack Dodge
Find your product here:
Dee Zee Invis-A-Rack Ford
Find your product here:
Dee Zee Invis-A-Rack Toyota
Find your product here:


  • No-hassle Velcro®* brand fastening features "sliding hook" technology.
  • Fully closed to fully open in 20 seconds.
  • Patented tension control means the cover stays tight from 20° below to 120° above automatically!
  • 4 way side and corner sealing system. More seals than any other cover.
  • Fast, easy roll-up design lets you use the truck bed anytime, anywhere!
  • Also Available with Embossed Harley Davidson Logo - Features all of the outstanding amenities of the well-known TruXedo® Lo-Pro QT tonneau cover, plus the addition of the Harley Davidson Motorcycles logo embossed on the tarp.
  • Limited Lifetime Warranty

When purchasing your TruXedo® Lo-Pro QT tonneau make sure that you specify the year, make and model of your truck. The TruXedo® Lo-Pro QT is custom built for the truck so you will not have to do any additional cutting, drilling or any other modifications to make it fit.


The Lo Pro QT Tonneau Cover is the best-selling tonneau cover in North America. Sleek, clean, and functional are just a few characteristics that describe the Lo Pro Tonneau Covers. Industrial-strength, leather-grain fabric will uphold in extreme environments and is sturdy enough for commercial used trucks. The durable Velcro will keep a seal tight closure protecting your cargo from the rain, dirt and other debris.

The Lo Pro QT Tonneau Cover fabric will not shrink or shrivel up in cold or hot temperatures. The automatic tension control structure will keep your tonneau cover snug in all temperatures and provide a compartment that will not be exposed to the elements. Providing extra security, the Lo Pro QT secures automatically when latched at the tailgate. Many tailgates are incapable of opening when the tonneau cover is on, however, the Lo Pro QT will not restrict the tailgate from openings or closing.

This Tonneau Covers install quicker than any other tonneau cover on the market. The cover removes in seconds giving you full access to the bed of your truck. The low profile cover and the angled sides will enhance your fuel economy by up to 10 percent.

  • Sleek, Low Profile Appearance
    Mounts on the inside of the bed for a sleek appearance on any truck.
  • Automatic Tension Control
    Patented spring tensioner self-adjusts to keep the cover tight in fluctuating temperatures. Great looks in any climate!
  • Easy Trigger Latch
    One finger release opens quickly and easily.
  • Easy Installation & Use
    Installs in minutes with pre-assembled, quick attach cover system. Bows conveniently roll up within cover for easy storage.
  • Free-Floating Hook & Loop System
    Industrial strength hook and loop moves on the rail and works with the tension control system to keep the cover tight, while reducing wear and tear.
  • Exclusive Side & Corner Sealing
    Keeps elements out of truck bed to protect cargo.


  • Invis-A Rack Cargo Management System
  • Innovative Design Allows Arm Supports to be folded into Bed Rail Casings
  • Superior Fuel Efficiency by Collapsing Ladder Rack When Not in use
  • Invisible to Invaluable in a Matter of Seconds
  • No-Drill Installation with Clamps Secured to the Truck Bed Rails
  • Sturdy and Lightweight Aluminum Construction
  • Texture Black Powder Coat Prevents Oxidation
  • Small Storage Box (6"-8" Beds) to Complete Rail Sections
  • All Mounting Hardware Included
  • 500 lb. Weight Capacity
  • Designed for Full Size Trucks
  • Made in USA
  • Limited-Lifetime Warranty

The era of monster ladder racks and permanent cargo systems is gone. The Invis-A-Rack Cargo Management System gives you a functional ladder rack that can be collapsed down into the bed rail casings while you're not using it. the benefits are immeasurable. It goes from invisible to invaluable in a matter of seconds.

Made of light-weight aluminum extrusions, this innovative cargo system has corrosion-free strength sealed by a texture black powder finish. High quality mechanisms make it last the life of your truck and provide a sturdy frame when deployed. Installation is made easy with heavy-duty clamps to secure the unit to your truck bed rails.

With a weight capacity of 500 pounds, you can rely on the all-American engineered and made Invis-A-Rack to withstand heavy-duty use. Turn your truck into a workhorse by day, and a town cruiser by night.

Lo-Pro QT®: Frequently Asked Questions

How do I care for my vinyl tonneau cover?
The vinyl fabric on your tonneau cover can be cleaned with mild soap and water, and may be hand washed or safely cleaned in the car wash of your choice. Thoroughly rinse cover to remove any soap residue. Vinyl cover can be treated with any vinyl protectants made for tonneau covers. Never clean cover with petroleum or citrus-based products, and avoid silicone based protectants.

How do I adjust the tension on my tonneau cover?
Set tension during warmest part of day. With cover closed, release hook and loop fasteners from both side rails near cab. Roll cover opened and rotate tension controls to adjust. Close cover and recheck. Repeat until satisfactory tension is achieved.

Will the Lo-Pro QT work with my other truck accessories?
Yes! The unique inside mount design of the Lo-Pro QT rails enables you to accessorize with most bed rails, bed liners, and rail caps.

Can I lock the Lo-Pro QT?
The Lo-Pro QT secures automatically when latched at the rear, and provides added security when used with a locking tailgate. It can not be opened until the tailgate is unlocked and opened. There are no additional locks or sliding mechanisms needed to lock the cover.

Will it work in the winter as well as in the summer?
The fabric expands slightly in cold weather, so it is very easy to operate – even at 20 degrees below zero! There are no cumbersome snaps or zip-strips to hassle with – no more tugging on the fabric to get it snapped. Just roll it back and latch into place. Then slide your hand along the sides to engage the Velcro® brand fasteners on the sides.

Will it work with a 5th wheel?
Yes! Simply roll the cover all the way open and secure with security straps at the front of the bed. This allows you full access to your 5th wheel.

Can I still open my tailgate with the Lo-Pro QT on my truck?
Yes – the Lo-Pro QT does not restrict the tailgate. The rear header functions independently of the tailgate so there is nothing to remove when opening the tailgate.

Does it come in different colors?
The Lo Pro is available in five popular colors including Black, Navy Blue, Buckskin, Charcoal Grey and Light Grey. We recommend that you call customer service at 877-878-9336 to have a color sample of the fabric sent to you before ordering. An additional charge may apply for colored covers. See dealer for details.

I have a bed extender. Will it work with it?
The TruXedo® Lo Pro QT side rails extend 3" into the bed on each side. In order to use the bed extender, it must not come within 3" of the side of the bed when rotated, or it must be able to detach from the truck, be manually rotated and re-attached. An adaptor kit is available to be purchased separately for 05-07 Nissan Frontiers and Nissan Titans with utili-trac systems. Please contact a dealer for more information.

I have a truck with a utility track system in the bed. Can I still use a Lo Pro QT?
Many of the late-model trucks have a utility track system to make the truck bed more accessory and user-friendly. We research all of the new trucks to make sure we have the best hardware to attach the cover to the truck. The hardware kits for these beds include modified clamps that will work with the various utility track systems. If you have questions on specific models, please contact customer service at 1-877-878-9336.

I live in a region that is very hot. Will the Lo-Pro QT fabric fade in the sun?
The fabric used in the Lo-Pro QT is very high quality and has been tested in extreme conditions. It is UV-protected and will not fade in the sun.

How long will it take to install it myself?
Typically, the Lo Pro QT can be installed easily in minutes!

Where can I order replacement parts for my TruXedo® Lo-Pro QT?
Only replacement part orders can go directly through TruXedo® by calling 1-877-878-9336.

Will I be able to open my Honda Ridgeline trunk?
Yes. Your trunk is fully functional and will open approximately 85% of the way.

Will the Lo Pro QT work with a drop in bed liner that goes over the bed rails?
Yes, it will work with a drop in bed liner that goes over the bed rails. However, installation for this particular application will vary slightly from the normal installation process. Small holes (approximately 2'x4") would need to be cut in the bed liner where the clamps will be installed. This allows access to the inner lip of the truck bed. If the liner goes over the front bulkhead and creates a radius at the front, you may need to cut slits in the bed liner at the front of the bed to allow the rails to push further forward in the bed.

Why is there a hole punched on the rear of the passenger side rail of the TruXedo Lo Pro QT, but no latch present?
The reason the rails are all punched the same way is to keep them uniform, for manufacturing efficiency and to reduce tooling costs.

I own a Nissan Frontier, will it work with my utility track system?
Yes, it will work with your track system. If your truck has the track system, install two clamps on each side rail, locating clamps at each end of Utili-track channels.

I own a Nissan Frontier and the application listing states that it does not include QT header guides.  What exactly does that mean?

The design of the Nissan Frontier is that the cab partially sits over top of the bulkhead. This minimizes space for the front header to sit on the bulkhead. In order for this kit to function properly, a cab weather seal is applied to the back of the bulkhead creating a larger contact surface for sealing. By adding this cab seal, it shortens the length of the truck bed and Lo Pro QT side rails. Since the rails are shortened on the Frontier kit, there is a possibility that the standard header guides would slide off the front of the side rails. We chose to bolt the front header to the side rails through an oblong hole, which still allows the tension control to be functional and eliminates the possibility of the front header from sliding off of the side rails.