Mile Marker H9000 Hydraulic Winch

Mile Marker H9000 Hydraulic Winch

Mile Marker's innovative design in its hydraulic winch focused on reliable power supply over the battery power used by its competitors. This makes the Mile Marker H9000 a valuable investment to off-road trucks. Unlike a battery powered recovery winch, the H9000 can operate even when the vehicle is turned off. The H9000 hydraulic winch was intended for permanent mounting in the front or rear of any vehicle and requires a vehicle specific 34-series winch adapter kit. The Mile Marker H9000 Hydraulic Winch is tried and tested on the most extreme environment and punishing situations. Shop for Mile Marker Hydraulic Winch Adapter Here

  • 9000 Pound (4082 kgs) capacity
  • 2 Speed
  • Mechanical Lock
  • Freespooling
  • Integrated Solenoid Valve
  • Can Use Underwater
  • Corrosion Resistant
  • Stainless Steel Tie Bars and Fasteners
  • 14 Cubic Inch Motor
  • Roller Fairlead
9,000 lb. Hydraulic Winch 2-Speed 12V
  - MILEM-70-50080C
Price: $1,433.41
Sale Price: $1,067.89
 

H9000 Specifications
Gear Train Planetary
Gear Ratio 6:1
Motor 9k: 14 cubic inch 10.5k: 17.9 cubic inch, 12k: 19.5 cubic inch
Control Pendant Not Included, Requires 34 Series Kit
Cable 3/8" X 100' (nominal 14,400 lbs) (9.53 mm X 30.5 m)
Drum Size: 2.5" X 9" (63.5 mm X 228.6 mm)
Net weight H9000, H10500: 93 lbs (42.2 kgs), H12000: 101 lbs (45.8 kgs)
Bolt Pattern 4 Bolt Pattern, 4.5" X 10", (114.3 mm X 254 mm)
Power Steering Min. Requirements: 3.5 GPM @ 1500 psi (13.25 L/m @ 103.4 bars)
H9000 Performance
3.5 GPM @ 1500 PSI (13.25 L/m @ 103.4 bars)
Layer of Cable 1 2 3 4
Line speed-low gear (FPM) 6.16 7.48 8.8 10.5
Rated pull (lbs.) 9,000 7,300 6,200 5,400
Line speed-high gear (FPM) 31 36 42 48
Rated pull (lbs.) 2,000 1,5501 1,350 1,150