Viair Constant Duty Onboard Air System

Viair Constant Duty Onboard Air System is a pre-packaged compressed air solution that provides a 100% duty cycle 450C compressor, 2.5 gallon air tank, and all hardware necessary in installing your own working system capable of inflating tires. This Onboard Air System inflates tires up to 35 inches. The system features a maximum working pressure of 150 PSI with IP67 ingress protection rating. The kit includes a remote mount air filter assembly sealed compressor. Order now!

• (1) 2.5 Gallon Viair Air Tank
• (1) 450C model Viair Air Compressor
• (1) 35ft. Coil Hose
• (1) 1/4" Quick Connect Stud (F)
• (1) 1/4" NPT Quick Connect Coupler (F)
• (1) Dash Panel Gauge with ON/OFF Switch
• (1) Pressure Switch with Relay (110 PSI on, 150 PSI off)
• (1) Reducer (1/8" NPT F to 1/4" NPT M)
• (1) 1/4" NPT 175 PSI Safety Valve
• (1) 1/4" Drain Cock
• (3) 1/4" NPT Compression Fittings
• (1) 4-inch Strip of Continuous Grommet Material
• (1) 20ft. 12 Gauge Wire with Inline Fuse Holder
• Installation Guide

• Universal Application
• Intended for inflation of tires 37 inches and higher
• Includes all parts needed for installation in-vehicle and tire maintenance
• Designed for uninterrupted use, meaning there is no need to let the unit cool down between applications
• One Year Limited Warranty

• Use thread sealant for proper installation.
• Teflon tape is not recommended.
• Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs.
• Recommended torque for 1/4" and 3/8" is 12 ~ 15 ft. lbs.