Fabtech Accessories LJ Unlimited

• 1 FTS94025 Fixed Yoke Rear CV Driveshaft

To use a CV style rear driveshaft on lifted Jeeps with steep pinion angles, the rear output shaft of the Transfer Case must be converted to a fixed yoke. Our Fixed Yoke conversion system comes complete with all necessary components to accommodate a CV driveshaft on Jeep New Process 231 transfer cases.

• Welding required.
• Housing must be drilled and tapped to accept bracket, see diagram, contact Dynatrac for machining.
• For off road use only.
• For use w/ Crawler system.
• Will retrofit to existing installed Fabtech Crawler system only.
• Current rear CV driveshaft must be lengthened by local drive line shop, or order above fixed yoke & driveshaft.
• Exhaust system must be modified by local exhaust shop. Fabtech does not offer an exhaust system for this application.
• Rear wheel sheet metal must be cut 3" back to allow for tire clearance.
• Requires aftermarket fuel tank. Contact Gen-Right Fuel Tanks. 805-584-8635.
• Must use w/ JK Coilover Conversion Kit.
• Verify rear end U-joint yoke size before ordering.

• 1 FTS94039 Fixed Yoke Rear CV Driveshaft

To use a CV style rear driveshaft on lifted Jeeps with steep pinion angles, the rear output shaft of the Transfer Case must be converted to a fixed yoke. Our Fixed Yoke conversion system comes complete with all necessary components to accommodate a CV driveshaft on Jeep New Process 231 transfer cases.

• 1 FTS94004 NP231 Fixed Yoke Kit

To use a CV style rear driveshaft on lifted Jeeps with steep pinion angles, the rear output shaft of the Transfer Case must be converted to a fixed yoke. Our Fixed Yoke conversion system comes complete with all necessary components to accommodate a CV driveshaft on Jeep New Process 231 transfer cases.

• 1 FTS94004 NP231 Fixed Yoke Kit

To use a CV style rear driveshaft on lifted Jeeps with steep pinion angles, the rear output shaft of the Transfer Case must be converted to a fixed yoke. Our Fixed Yoke conversion system comes complete with all necessary components to accommodate a CV driveshaft on Jeep New Process 231 transfer cases.

• 1 FTS94004 NP231 Fixed Yoke Kit

To use a CV style rear driveshaft on lifted Jeeps with steep pinion angles, the rear output shaft of the Transfer Case must be converted to a fixed yoke. Our Fixed Yoke conversion system comes complete with all necessary components to accommodate a CV driveshaft on Jeep New Process 231 transfer cases.

• 1 FTS94030 Rear Eccentric Cam Kit

• 1 FTS94030 Rear Eccentric Cam Kit

• 1 FTS94054 Front Trac Bar Drop 4"

• For use with 4" systems only.

• 1 FTS94017 6" / 8" Front & Rear Brake Hoses

Some suspension systems require longer brake lines. So Fabtech have designed factory replacements, using the highest quality braided stainless steel lines. All of their extended brake line kits meet DOT specifications.

• 1 FTS94017 6" / 8" Front & Rear Brake Hoses

Some suspension systems require longer brake lines. So Fabtech have designed factory replacements, using the highest quality braided stainless steel lines. All of their extended brake line kits meet DOT specifications.