Pro Comp Jeep LJ Unlimited Suspension Lifts

Pro Comp Jeep LJ Unlimited Suspension Lifts

Jeep Wrangler 2004-2006 - 4" Stage I Short Arm Lift Kit w/ ES3000 Shocks
  - EXP-K3084B
Price: $1,438.55
Sale Price: $1,078.91
 

Features:

  • Shocks: Front/Rear ES3000
  • Max Tire Size: 33x12.50R15-20, 285/75R-16, 285/70R17,295/65R18, 295/55R20
  • Wheel Size: 15" thru 20" up to 9" wide rims with 3.5" to 4.5" BS
  • Front Lift: Coil Springs
  • Rear Lift: Coil Springs
  • Install Time: 6-8 Hours

Notes:

  • (2) Driveline modifications may be required for height increases over 1.5" due to increased driveline angles. Transfer case SYE (Slip Yoke Eliminator) kit and CV rear drive shaft required for Long Arm Applications. Rubicon models will require CV drive shaft w flange adapter (not avail from Pro Comp).
  • (3) Vehicles with Auto Trans will require removal of front skid plate when using transfer case lowering hardware.
  • (4) All ride height increases are approximate and will vary due to vehicle specification (Engine size, factory options, trail equipment, etc).
  • (5) Coil spacer 55496 can be used to increase front ride height by .75".
  • (7) Vehicle will require alignment after kit is installed.
  • (8) Front cambolt kit 20-65226 is recommended for caster angle adjustments. In most cases, reducing positive caster to the minimum factory specification will reduce or eliminate the potential for steering wheel shimmy.
  • (9) Rear cambolt kit 20-65225 can be used for tuning pinion angle for minor driveline vibration correction.
Jeep TJ 1997-2006 - 4" Stage II Short Arm Lift Kit w/ ES3000 Shocks
  - EXP-K3083B
4.0 / 5 based on 1 customer reviews
Price: $1,897.45
Sale Price: $1,423.09
 

Features:

  • Shocks: Front/Rear ES3000
  • Max Tire Size: 33x12.50R15-20, 285/75R-16, 285/70R17,295/65R18, 295/55R20
  • Wheel Size: 15" thru 20" up to 9" wide rims with 3.5" to 4.5" BS
  • Front Lift: Coil Springs
  • Rear Lift: Coil Springs
  • Install Time: 6-8 Hours

Notes:

  • (2) Driveline modifications may be required for height increases over 1.5" due to increased driveline angles. Transfer case SYE (Slip Yoke Eliminator) kit and CV rear drive shaft required for Long Arm Applications. Rubicon models will require CV drive shaft w flange adapter (not avail from Pro Comp).
  • (3) Vehicles with Auto Trans will require removal of front skid plate when using transfer case lowering hardware.
  • (4) All ride height increases are approximate and will vary due to vehicle specification (Engine size, factory options, trail equipment, etc).
  • (5) Coil spacer 55496 can be used to increase front ride height by .75".
  • (7) Vehicle will require alignment after kit is installed.
  • (8) Front cambolt kit 20-65226 is recommended for caster angle adjustments. In most cases, reducing positive caster to the minimum factory specification will reduce or eliminate the potential for steering wheel shimmy.
  • (9) Rear cambolt kit 20-65225 can be used for tuning pinion angle for minor driveline vibration correction.
Jeep Wrangler 1997-2006 - 4" Stage II Short Arm Lift Kit w/ ES3000 Shocks
  - EXP-K3083B
4.0 / 5 based on 1 customer reviews
Price: $1,897.45
Sale Price: $1,423.09
 

Features:

  • Shocks: Front/Rear ES3000
  • Max Tire Size: 33x12.50R15-20, 285/75R-16, 285/70R17,295/65R18, 295/55R20
  • Wheel Size: 15" thru 20" up to 9" wide rims with 3.5" to 4.5" BS
  • Front Lift: Coil Springs
  • Rear Lift: Coil Springs
  • Install Time: 6-8 Hours

Notes:

  • (2) Driveline modifications may be required for height increases over 1.5" due to increased driveline angles. Transfer case SYE (Slip Yoke Eliminator) kit and CV rear drive shaft required for Long Arm Applications. Rubicon models will require CV drive shaft w flange adapter (not avail from Pro Comp).
  • (3) Vehicles with Auto Trans will require removal of front skid plate when using transfer case lowering hardware.
  • (4) All ride height increases are approximate and will vary due to vehicle specification (Engine size, factory options, trail equipment, etc).
  • (5) Coil spacer 55496 can be used to increase front ride height by .75".
  • (7) Vehicle will require alignment after kit is installed.
  • (8) Front cambolt kit 20-65226 is recommended for caster angle adjustments. In most cases, reducing positive caster to the minimum factory specification will reduce or eliminate the potential for steering wheel shimmy.
  • (9) Rear cambolt kit 20-65225 can be used for tuning pinion angle for minor driveline vibration correction.

Pro Comp Suspension has applied racing technology to create a dual sport, long arm suspension system for the 04-06 Jeep LJ Unlimited. This new 4” LJ long arm system maintains a lower roll-center for unparalleled off road stability, superior articulation and excellent on road performance. The lower arms are fabricated from laser cut 3/16” thick steel plate for outstanding durability and come equipped with aerospace grade high angle rod ends and long lasting polyurethane bushings. Adjustable length front upper arms are included to optimize pinion angle and alignment specifications. A rear truss strengthens the axle housing and provides a mounting point for the rear 4-link arms. This gives ideal rear suspension geometry and helps eliminate torque steer. The high clearance belly pan integrates attachment points for the lower arms and adds chassis rigidity. A removable center pan allows easy service access for the transmission and transfer case. Stage II systems feature MX6 adjustable front and rear shocks for outstanding ride comfort and handling. Stage I systems are available with ES9000 shock absorbers to deliver factory ride quality. 4” of lift allows the use of 35” x 12.50” tires on 16”+ diameter rims up to 9” wide with up to 5” backspacing.

Product Reviews Summary
Overall: 
4.0
1 Customer Review(s)
Appearance
3.0
Ease of Installation
5.0
Price / Value
4.0
Quality
4.0
Click Here to See
Customer Reviews of This Product