For returning customers, please enter your email and password to log in to your account.
Features:
Note: Compatible with most racing shock absorbers using 0.50 in. ID spherical bearings.
Installation
JKS Shock Extensions eliminate interference between the shock absorber and axle housing – a problem that commonly occurs on Wrangler TJ models when a CV-type driveshaft is installed. This is achieved by relocating the lower rear shock mounts away from the axle housing. The additional clearance provides plenty of room for the shock absorbers to be installed without any interference.
The Shock Extensions are just as effective on applications with extreme suspension travel, where the axle housing rotates in response to excessive droop. Installation is simple and no welding is required, as the bolt-on extensions fit securely on the factory shock mounts. Anti-corrosive mounting hardware is provided, and a durable powder coat finish is applied for long-lasting protection.
When a CV-type rear driveshaft is installed on Wrangler TJ models, the rear axle housing must be rotated to align the pinion with the driveshaft. Unfortunately, the reclined axle position forces the factory shock mounts under the axle housing just enough to create an interference problem with the shock absorbers. The interference occurs between the shock absorber and the lower coil spring mount on the axle housing. Unless corrected, this problem can easily damage the shock absorbers beyond repair.