factory length= 13-1/4”
min. length= 13”
max length= 14-3/8”
Uses 7/16” [12mm] bolt ,
7/8-18 UNS thread,
1 1/8” wrench on tube,
1 1/4” wrench on jam nut.
sold in pairs

INSTALL TIME: 6 hour avg.

  Upgrade your current lift kit with the advantages of long arm performance. The upgrade includes control arm bracketry, and our heavy duty Monster end assemblies with 1.75” DOM arms. The control arm bracketry allows for easy installation.

  Fits all Wrangler models including the Rubicon and Unlimited.

  NOTE: If your vehicle has over 3” of lift, we recommend that you use the long arm kit as an upgrade to new Monster Arms.

COMPONENT #	DESCRIPTION	QTY
1447701	bracket box	1
1447702	long arm box	2

Needed to complete installation: lift kit, shock absorbers
Recommended Accessories: swaybar disconnects
Optional Accessories: BellyUp, steering box, oil pan, and gas tank skid plates

TeraFlex Monster Arms have five inches of total thread length. The industry standard 1-1/4” rod end has only 1-1/2” of thread length. This additional length allows for up to 4 inches of custom FlexArm length adjustment. TeraFlex Monster FlexArms offer the ultimate in performance, durability and strength. The urethane and steel rod ends provide a full 30 degrees of misalignment for maximum range of motion as the suspension cycles.

standard length= 33”
min. length= 31-1/2”
max length= 36”
Uses 7/16” [12mm] bolt,
1 1/4-12 UNF thread,
1 1/2” wrench on tube,
1 7/8” wrench on jam nut.
TJ Long Front Upper FlexArm (MAX LCG 4-Link)

min. length= 31-9/16”
max length= 36-3/16”
Uses 9/16” [14mm] bolt,
1 1/4-12 UNF thread,
1 1/2” wrench on tube,
1 7/8” wrench on jam nut.
sold in pairs

min. length= 31-9/16”
max length= 36-3/16”
Uses 9/16” [14mm] bolt,
1 1/4-12 UNF thread,
1 1/2” wrench on tube,
1 7/8” wrench on jam nut.
sold in pairs

stock length= 15-3/45”
min. length= 15”
max length= 16-1/2”
sold in pairs

stock length= 13-1/4”
min. length= 12-1/2”
max length= 14”
sold in pairs

INSTALL TIME: 6 hour avg.

  Upgrade your current lift kit with the advantages of long arm performance. The upgrade includes control arm bracketry, and our heavy duty Monster end assemblies with 1.75” DOM arms. The control arm bracketry allows for easy installation.

  Fits all Wrangler models including the Rubicon and Unlimited.

  NOTE: If your vehicle has over 3” of lift, we recommend that you use the long arm kit as an upgrade to new Monster Arms.

COMPONENT #	DESCRIPTION	QTY
1447701	bracket box	1
1447702	long arm box	1
1447704	Rr Unlimited long arm box	2

Needed to complete installation: lift kit, shock absorbers
Recommended Accessories: swaybar disconnects
Optional Accessories: BellyUp, steering box, oil pan, and gas tank skid plates

min. length= 41-11/16”
max length= 44-1/16”
Uses 9/16” [14mm] bolt,
1 1/4-12 UNF thread,
1 1/2” wrench on tube,
1 7/8” wrench on jam nut.
sold in pairs

min. length= 31-9/16”
max length= 36-3/16”
Uses 9/16” [14mm] bolt,
1 1/4-12 UNF thread,
1 1/2” wrench on tube,
1 7/8” wrench on jam nut.
sold in pairs

INSTALL TIME: 6 hour avg.

  The Monster short arm system is designed for short arm applications looking for heavy duty performance. This kit comes with front and rear lower Monster FlexArms, a steering box skid plate, and front swaybar disconnects. This kit will also enhance the performance of lifts (up to 3” of lift) from other manufacturers.

Fits all Wrangler models including the Rubicon and Unlimited.

NOTE: This short arm system kit is designed for suspension lifts up to 3”. If your vehicle has over 3” of lift please use our long arm system - part # TERA-1447000.

INSTALL TIME: 6 hour avg.

  The standard short arm system is designed for short arm applications looking for heavy duty performance. This kit comes with front and rear lower standard FlexArms, a steering box skid plate, and front swaybar disconnects. This kit will also enhance the performance of lifts (up to 3” of lift) from other manufacturers.

Fits all Wrangler models including the Rubicon and Unlimited.

NOTE: This short arm system kit is designed for suspension lifts up to 3”. If your vehicle has over 3” of lift please use our long arm system Part # TERA-1447000.

factory length= 15-1/8”
min. length= 14-13/16’”
max length= 17-3/16”
Uses 7/16” [12mm] bolt ,
7/8-18 UNS thread,
1 1/8” wrench on tube,
1 1/4” wrench on jam nut.
sold in pairs

INSTALL TIME: 1 hour avg.

  These Flex arms incorporate latest design Modular components.

factory length= 15-3/4”
min. length= 14-15/16”
max length= 17-5/16”
Uses 9/16” [14mm] bolt,
1 1/4-12 UNF thread,
1 1/2” wrench on tube,
1 7/8” wrench on Jam nut.

Fit:
Front or rear of 1997-2006 Wranglers
Front of 1984+ XJ Cherokees
Front or rear 1993-1998 ZJ Grand Cherokee
Front or rear 1999-2004 WJ Grand Cherokee

stock length= 15-1/8”
min. length= 14-3/8”
max length= 15-7/8”
sold in pairs