The TeraFlex Dana 30 High Steer Knuckle replaces the outer knuckle on the passenger’s side with a new high steer knuckle. The knuckle features tapered inserts that make customizing easy by allowing the drag link (knuckle end) to enter from the top or the bottom of the steering arm. The tapered sleeves are available for the drag link to fit stock taper rod ends, or the large taper rod ends (standard Dana 60).

  The new one-piece knuckle raises the steering arm position to correct the steering linkage geometry on vehicles with five or more inches of lift. This knuckle will work with many leaf spring suspensions (YJ) or custom link suspensions (like the Tera LCG system) and fits all TJs, YJs, XJs, and ZJs 1990 and up.

  Custom tie rod & drag link (available separately) are required.

  Note: The stock OEM ends will not work in place of TeraFlex’s stock-taper one ton end.

INSTALL TIME: 3.3 hour avg.

  The TeraFlex high steer system was originally designed to be used with the MAX LCG, which utilizes a front 4-link triangulation (eliminating the trackbar). The High Steer Kit is essential in that application. Jeep®s with more than 5” of lift while still utilizing a trackbar system would benefit from a high steer solution.

  This kit will beef up the essential steering components of your Dana 30 front axle. The system includes a HD tie rod and drag link with one ton tie rod ends & tapered inserts, and the HD cast high steer knuckle.

  NOTE: The high steer system is not an all inclusive kit. Additional modifications will be required that are not included in the TeraFlex high steer system. These modifications may include front swaybar links, front trackbar mounting, and offset wheels.

COMPONENT #	DESCRIPTION	QTY
4828490	high steer knuckle	1
4920244	HD drag link w/ends	1
4920251	HD tie rod w/ends	1

INSTALL TIME: 3.3 hour avg.

  The TeraFlex high steer system was originally designed to be used with the MAX LCG, which utilizes a front 4-link triangulation (eliminating the trackbar). This High Steer Kit is the same system that comes with the MAX LCG kit.

  The TeraFlex high steer system will beef up the essential steering components of your Dana 30 front axle. The system includes a HD tie rod and drag link with one ton tie rod ends & tapered inserts, new pitman arm, and the HD cast high steer knuckle.

  NOTE: The high steer system is not an all inclusive kit. Additional modifications will be required that are not included in the TeraFlex high steer system. These modifications may include front swaybar links, front trackbar mounting, and offset wheels.

COMPONENT #	DESCRIPTION	QTY
4828490	high steer knuckle	1
4920244	HD drag link w/ends	1
4920251	HD tie rod w/ends	1
4922133	drop pitman arm	1
4959101	left swaybar mount	1
4959102	right swaybar mount	1
1743011	quick disconnects	1