INSTALL TIME: 3 hour avg.

  The TeraFlex JK FlexArm system can be added to any existing suspension lift. It includes all lower and upper FlexArms. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement.

INSTALL TIME: 1 hour avg.

factory length= 22-1/2”
min. length= 22-3/4”
max length= 24-3/16”
Uses 9/16” [14mm] bolt,
1 1/4-12 UNF thread,
1 1/2” wrench on tube,
1 7/8” wrench on Jam nut.
sold in pairs

INSTALL TIME: 1 hour avg.

min. length= 32-3/4”
max length= 35-1/16”
Uses 9/16” [14mm] bolt,
1 1/4-12 UNF thread,
1 1/2” wrench on tube,
1 7/8” wrench on Jam nut.
sold in pairs

INSTALL TIME: 1 hour avg.

factory length= 18-3/4”
min. length= 18-1/4”
max length= 20-5/8”
Uses 7/16” [12mm] bolt ,
7/8-18 UNS thread,
1 1/8” wrench on tube,
1 1/4” wrench on jam nut
sold in pairs

INSTALL TIME: 1 hour avg.

min. length= 26-3/4”
max length= 28-1/8”
Uses 12mm bolt (@axle end),
Uses 14mm/ 9/16” bolt (@frame end),
7/8-18 UNS thread,
1 1/8” wrench on tube,
1 1/4” wrench on jam nut
sold in pairs

INSTALL TIME: 1 hour avg.

factory length= 20-5/16”
min. length= 19-13/16”
max length= 22-3/16”
Uses 9/16” [14mm] bolt,
1 1/4-12 UNF thread,
1 1/2” wrench on tube,
1 7/8” wrench on Jam nut.
sold in pairs

INSTALL TIME: 1 hour avg.

min. length= 34-7/8”
max length= 37-1/4”
Uses 9/16” [14mm] bolt,
1 1/4-12 UNF thread,
1 1/2” wrench on tube,
1 7/8” wrench on Jam nut.
sold in pairs

INSTALL TIME: 1 hour avg.

factory length= 17-7/16”
min. length= 18-5/16”
max length= 19-5/8”
Uses 9/16” [14mm] bolt,
7/8-18 UNS thread,
1 1/8” wrench on tube,
1 1/4” wrench on jam nut
sold in pairs

INSTALL TIME: 1 hour avg.

min. length= 19-5/8”
max length= 21”
Uses 9/16” [14mm] bolt,
7/8-18 UNS thread,
1 1/8” wrench on tube,
1 1/4” wrench on jam nut
sold in pairs

This repair tool will make joint rebuilding in the field as simple as it gets. This in fact is the same tool that we use in house to rebuild joints. The repair tool is easy to use with two open end wrenches, or sockets.

This repair tool will make joint rebuilding in the field as simple as it gets. This in fact is the same tool that we use in house to rebuild joints. The repair tool is easy to use with two open end wrenches, or sockets.