Add on a durable .120 wall tubular Hoop Overrider to create the ultimate offroad bumper. These are some tough tubes!

Note: Does not work with all winch applications. Please Call for Apps.

Add on a durable .120 wall tubular Hoop Overrider to create the ultimate offroad bumper. These are some tough tubes!

Note: Does not work with all winch applications. Please Call for Apps.

The XHD Short Base comes in two designs: Integrated Winch Mount for use with almost any aftermarket winch (including the new Warn Power Plant with optional mounting blocks #11540.15) and Light Mount Base with two light mounting locations.

The Short Base attaches quickly to the frame with two enclosed D-Ring mounting brackets. This four bolt frame mount design provides the toughest bumper attachment found anywhere while creating two overbuilt pull points. This bumper mounts close in on the frame rails, drawing the bumper closer to the body and increasing the approach angle. The narrow overall width gives enormous clearance for the front tires. Each Short Base includes two protected cut outs for your JK's factory fog lamps. Built in euro-guards protect the fog lamps from the elements while creating an easy mount point. Each Short Base includes side filler plates to close off the ends for a finished look.

The XHD Short Base comes in two designs: Integrated Winch Mount for use with almost any aftermarket winch (including the new Warn Power Plant with optional mounting blocks #11540.15) and Light Mount Base with two light mounting locations.

The Short Base attaches quickly to the frame with two enclosed D-Ring mounting brackets. This four bolt frame mount design provides the toughest bumper attachment found anywhere while creating two overbuilt pull points. This bumper mounts close in on the frame rails, drawing the bumper closer to the body and increasing the approach angle. The narrow overall width gives enormous clearance for the front tires. Each Short Base includes two protected cut outs for your JK's factory fog lamps. Built in euro-guards protect the fog lamps from the elements while creating an easy mount point. Each Short Base includes side filler plates to close off the ends for a finished look.

NEW XHD Front Bumper Additions- Now fits from 1976-2010!. New applications now fit CJ/YJ/TJBy adding 3 part numbers you now can interchange components between 07-10 XHD models and 76-06 models. These 3 part numbers now give Jeep owners 33 years of vehicle coverage!

Many existing parts are interchangeable so wholesale customers stock less with more vehicle coverage. Also new, is the polished Stainless Steel XHD light mount center section and Standard Ends for JK. With these new Stainless additions, you now have over 100 different bumper options! Note: If using a Warn Power Plant Winch, the XHD Hoop Over Rider will not fit on 07-10 Wrangler

Mounts WARN Power Plant Winch on the XHD bumper system

The XHD Stainless Steel Short Base comes in two designs; Integrated Winch Mount for use with almost any aftermarket winch (including the new Warn Power Plant with optional mounting blocks #11540.15) and Light Mount Base with two light mounting locations. The Short Base attaches quickly to the frame with two enclosed D-Ring mounting brackets.

This four bolt frame mount design provides the toughest bumper attachment found anywhere while creating two overbuilt pull points. This bumper mounts close in on the frame rails, drawing the bumper closer to the body and increasing the approach angle. The narrow overall width gives enormous clearance for the front tires. Each Short Base includes two protected cut outs for your JK's factory fog lamps. Built in euro-guards protect the fog lamps from the elements while creating an easy mount point. Each Short Base includes side filler plates to close off the ends for a finished look. The polished stainless steel finish is guaranteed to be a real eye catcher.

Add tube ends to your XHD bumper for added protection and a classic OE look! XHD Tube Ends offer wraparound protection and added clearance for oversized tires.

Available in either textured black powder coat or polished 304 stainless steel for a long lasting durable finish. All Tube Ends bolt directly to the XHD Center section (sold seprately). Limited 3 year warranty

Looking for an easily accessible yet secure storage solution for your Wrangler? XHD Storage Ends from Rugged Ridge turn your bumper into a stylish watertight storage vault.

The XHD Storage ends are a great place to stow recovery gear and other valuables. Beefy steel construction, a watertight seal, and lockable lid helps keep mud and water out and your gear in.

Accommodates tire sizes up to 35" and includes a 2" receiver box for use with accessories. Is a bolt on application and includes a special UV treated textured plastic filler plate to fill in the gap between the body and the bumper.

Tough 2" tubing is designed for off road use. Hitch box is designed for use with todays most popular accessories (Not designed for Towing). Tough dual stage powder coat finish provides a long life. Limited 3 year warranty

NEW XHD Front Bumper Additions- Now fits from 1976-2010!. New applications now fit CJ/YJ/TJBy adding 3 part numbers you now can interchange components between 07-10 XHD models and 76-06 models.

These 3 part numbers now give Jeep owners 33 years of vehicle coverage! Many existing parts are interchangeable so wholesale customers stock less with more vehicle coverage. Also new for 2010, are polished Stainless Steel XHD light mount center section and Standard Ends for JK. With these new Stainless additions, you now have over 100 different bumper options! Note: If using a Warn Power Plant Winch, the XHD Hoop Over Rider will not fit on 07-10 Wrangler

Upgrade the standard XHD D-rings with these polished stainless steel pieces. They are every bit as strong as the standard rings with the bonus of being constructed of rust proof stainless steel for a long service life.

Standard ends easily mount to any Short Base with six oversized 12mm bolts to turn your short bumper into a full size bumper design. Each Standard end is recessed to provide the ultimate fit with the short bases creating an almost seamless fit. Standard Ends Turn Your Short Base Into A Full Size Bumper!

Add on a durable .120 wall tubular Hoop Overrider to create the ultimate offroad bumper. These are some tough tubes! The RRC mount uses a unique D-ring attachment so you will need separate optional D-rings. The enclosed HDD-rings on the short base will not be used with these two tubular options.