Rugged Ridge Jeep
RRC Reclining Racing Seat

Rugged Ridge Jeep RRC Reclining Racing Seat

Each Rugged Ridge RRC Racing Seat features dual reclining mechanisms allowing for infinite reclining positions. The special "Jeep Specific" design uses ultra dense foam and steel construction for greater comfort and long life. Side bolsters have been slightly expanded and designed specifically for both lifted and nonlifted Jeep vehicles. Special air adjustable lumbar support provides the ultimate back support in a racing seat design. Woven fabric and vinyl construction give the ultimate in comfort and wearability. Each Rugged Ridge RRC Racing Sea has three seat belt harness cutouts for use with a multi-point racing harness seatbelt.

Note: 97-02 Wrangler requires font seat adapter brackets 13201.11 (for driver side) and 13201.12 (for passenger side) for these seats to mount on the factory seat brackets

Please check the Rugged Ridge Seat Adapters Page here

RRC Reclining Racing Seat, 1976-2002 CJ & Wrangler, Black/Black
  - RGDR-13406.15
Price: $321.40
Sale Price: $223.37
 
RRC Reclining Racing Seat, 1976-2002 CJ & Wrangler, Grey/Black
  - RGDR-13406.09
Price: $321.40
Sale Price: $223.37
 
RRC Reclining Racing Seat, 1976-2002 CJ & Wrangler, Red/Black
  - RGDR-13406.53
Price: $321.40
Sale Price: $223.37
 

Rugged Ridge RRC Seat Installation Instructions

  1. Remove old seat from riser by removing 4 bolts. Save these bolts as they will be reused later.
  2. Remove sliders from old seats by removing 4 bolts. Save these bolts as they will be reused later.

    3. NOTE: To access the rear 2 bolts push slider arm down and move slider forward.

  3. Place sliders onto new seats. Reuse spacers from the old seat to align the slider.
  4. Fasten slider to the new seat using the 4 bolts saved from step 5
  5. Carefully place slider back onto seat riser and fasten with 4 bolts saved from step 4
  6. With seat installed route the air hose and air pump under seat and to the front left or right corner of the seat.
  7. Velcro straps have been supplied on the left and right side of the seat so that the air pump can be mounted in relation to what side of the vehicle the seat has been mounted. For the drivers side it is recommended that it be placed on the right side of the seat (inboard). When attached to the passenger side it is suggested to use the left side of the seat. By locating the air pump to these spots you will not hi them when entering or exiting of the vehicle.
  8. Air is added to the lower lumbar support by closing the air valve screw and pumping the air bladder. (DO NOT OVER INFLATE). to release the air and to adjust for comfort simply unscrew air valve and bleed out air until the correct setting is found.

Click to Enlarge

Rugged Ridge Jeep RRC Reclining Racing Seat Rugged Ridge Jeep RRC Reclining Racing Seat Rugged Ridge Jeep RRC Reclining Racing Seat Rugged Ridge Jeep RRC Reclining Racing Seat Rugged Ridge Jeep RRC Reclining Racing Seat Rugged Ridge Jeep RRC Reclining Racing Seat Rugged Ridge Jeep RRC Reclining Racing Seat
View Cart Checkout
0 items in your cart
 
Image(s) may not reflect the product(s) being sold.

New Customer Service Hours:
Mon - Th: 9:00am - 11:00pm EST
Fri-Sun: 9:00am - 7:00pm EST
If you have any questions just give us a call: 813-769-2451
**UNLIKE OUR COMPETITION WE HAVE NO HANDLING FEES OR HIDDEN CHARGES**