 |
 |
|
JET Jeep Performance Products
|
|
|
|
JET Performance Products are developed at state of the art facility in Huntington Beach, California using the latest Dynamometer Techniques and computer monitoring equipment to insure all JET chips and modules are tuned for the maximum torque and horsepower gains throughout the RPM band.
The programming changes to each JET chip are extensive and include modified spark advance tables, air fuel ratio modification, torque converter lockup (in automatics), shift improvement in electronic automatic transmission and various other parameters to optimize the torque and horsepower curve for each individual application. Chassis Dynamometer tuning allows JET to develop a specific program for each application.
Every vehicle is first tested in a stock configuration to get baseline dynamometer and track times. To do this the vehicle is connected to JET's custom data acquisition system to monitor various sensors. Engine temperature, spark advance and air/fuel ratios, all this data is then recorded and stored away for later comparison.
From there we start to modify the spark advance and fuel curve in 500 rpm increments until we achieve the maximum torque and horsepower at the drive wheels in each rpm and load range, this allows turning under all types of various driving conditions and not just wide open throttle, a decisive advantage to the JET chip!
All the Data is stored on disk and transferred to the JET chip program so thorough track and street testing can be done under "real world driving conditions" to assure the Dyno results prove out on the road in decreased 0-60 mph times and quicker ΒΌ miles acceleration.
|
|
| |
|
| |
Frequently Asked Questions
 How will JET Performance Power Tuning affect my gas mileage?
How will JET Performance Power Tuning affect my gas mileage? JET Performance Power Tuning does not alter your vehicles calibrations in any way that would hurt fuel economy. Fuel economy will remain virtually the same or may even improve (depending upon specific driving patterns) unless the vehicle is driven in a spirited manner (lead foot). For trucks that tow, JET Performance's Power Tuning is generally closer to the better fuel economy than the stock tuning. So in addition to power gains, a vehicle that tows with JET Performance installed will often exhibit better mileage than one with stock tuning.
 Will JET Performance tuning void my warranty?
Will JET Performance tuning void my warranty? No. Federal law prohibits a dealer from voiding your warranty just because you are using aftermarket speed equipment, with only two exceptions: the warranty can be voided if the aftermarket part causes damage or adversely affects the emissions or the emissions system. In recent documents produced by the SEMA (Specialty Equipment Market Association), a trade association-representing specialty automotive parts manufacturers, and the following quotes have been extracted:
"The vehicle manufacturer is not allowed to void the vehicle warranty just because aftermarket equipment is installed on the vehicle. This protection for consumers is the result of a parts self-certification program developed by the Environmental Protection Agency (EPA) and the Specialty Equipment Market Association (SEMA).
"Under the program, if a parts maker completes the EPA process of self-certifying its parts, the vehicle manufacturer cannot void the warranty even if the certified part has failed and is directly responsible for the warranty claim. In cases where such a failed aftermarket part is responsible for a warranty claim, the manufacturer must arrange a settlement with the part manufacturer, but the new vehicle warrant is not void under the law.
"If the failure to honor a claim involves the new-vehicle warranty, and it appears that the manufacturer is improperly denying a claim, the incident should be reported to the Federal Trade Commission (FTC). The FTC is responsible for monitoring compliance with the warranty law; the agency's telephone number is (202)326-3128."
For more information see SEMA's website at www.sema.org.
What performance increase can I expect from JET Performance Tuning?
What performance increase can I expect from JET Performance Tuning? JET Performance carefully dyno and track test every product. In fact, it is these tests that tells when JET has the best possible tuning. Of course, the power gains are different for each engine family and vehicle weight. However, power gains range from about 10 Horsepower to over 50 H.P. on supercharged or turbocharged engines, resulting in a 2 to 7 car length improvements in the quarter mile. Zero to 60 M.P.H. improvements are typically about 1/2 second. See the Dyno Sheets and/or Horsepower Gains sections for information on your particular vehicle.
What's the difference between Stage 1 and Stage 2 Power Tuning?
What's the difference between Stage 1 and Stage 2 Power Tuning? Stage 1: For stock or mildly modified vehicles. Fuel and timing curves modified for optimal performance and mileage using midgrade fuel (89 octane or better recommended). Good for daily driving, towing and street performance. Improves horsepower, torque, overall acceleration and throttle response. No other modifications to vehicle are required, but the Stage 1 programming will work with most aftermarket upgrades without using premium fuel.
Stage 2: Designed for the performance enthusiast, the Stage 2 features more aggressive programming to make the most horsepower and torque available. The Stage 2 programming requires use of 91 octane fuel to optimize the advanced timing curves, a 180 degree thermostat to provide a denser air/fuel mixture and a free flow exhaust system to reduce back-pressure. The stage 2 will also enhance the performance of aftermarket intake systems, mass air sensors, TBI spacers, etc.
If JET Performance Power Tuning is so great, why didn't the factories do it that way?
If JET Performance Power Tuning is so great, why didn't the factories do it that way? The factory programming is designed for the average driver and is designed to take a wide variety of operating conditions and driving styles into consideration. Consequently, stock calibrations aren't set to provide maximum power because they have to accommodate drivers who may use lower quality gasoline and poorly maintain their vehicles. For a real high performance person who carefully maintains their vehicle midgrade or premium is all they ever use. JET Performance programming optimizes the spark and fuel curves over the entire RPM band, from just off idle right up to the redline for maximum power and performance from a well maintained vehicle using better than average fuel.
Will Power Tuning hurt my engine in any way?
Will Power Tuning hurt my engine in any way? No. Best power is always made when air/fuel ratio and the spark tuning has been optimized for maximum power, meaning maximum "push" on the piston during each power stroke. Damage occurs if the air/fuel mixture is too lean, meaning that there is not enough fuel for the amount of air in the cylinder. This results in excess super heated air, which can cause burning of valves and pistons and will also induce detonation (which can break pistons, etc.) Relative to spark timing, too much "advance" will cause detonation, which reduces power and can also damage parts exactly as a lean mixture does. When you finish installing JET Performance on your vehicle, your engine will run at maximum efficiency yet safely distanced from possible damage due to leanness or excessive spark advance.
What happens if I have or plan to install other aftermarket equipment?
What happens if I have or plan to install other aftermarket equipment? Custom Programs are available if you have installed aftermarket intake manifolds, camshafts, large mass air-flow sensors, nitrous oxide systems, or any type of supercharger or turbo system. You absolutely need JET Performance Custom Programs with these modifications for both tremendous power gains over stock tuning as well as to eliminate the probability of lean air/fuel ratios and excessive spark advance which are death to modified engines. You do not need a Custom Program for engines that are stock or mildly modified. For example, high-flow air filters, cold air intake systems, cat back systems and TBI spacers work perfectly with our Stage 1 or Stage 2 Power Tuning.
How does JET Performance Power Tuning change the way my engine performs?
How does JET Performance Power Tuning change the way my engine performs? JET Performance tuning replaces stock computer tuning inside the vehicle computer to give maximum power and torque. The tuning can be delivered in the form of a chip that replaces the stock computer chip, a chip that piggy-backs the stock computer chip, a chip that plugs into the back of the stock computer, or a module that intercepts and modifies the signals from the stock computer with JET Performance Power Tuning. The type of computer in your vehicle dictates the type of device needed. The tuning information is stored in the computer chip which controls all of the engine's characteristics like air/fuel ratio, spark advance, shift firmness, shift points, top speed, rev limit, and axle ratio. Sensors monitor many engine and transmission parameters like RPM, manifold air pressure, mass air flow, coolant temperature, intake air temperature and many more. These sensors send this information to the computer. The computer uses this information delivered from the sensors along with the information stored on the chip to deliver the optimum air/fuel ratio, spark timing, shift firmness, etc. for this set of operating conditions at that instant in time. JET Performance can tune a vehicle for the conditions by using a dynamometer to measure horsepower output while altering the information stored on the chip. This is how JET Performance maximizes your vehicle's power output!
Are JET Performance Chips emissions legal?
Are JET Performance Chips emissions legal? Yes. All JET Performance Chips and most Performance Modules are 50 state emissions legal. They do not change the emissions at all from the stock tuning chip for any Federal or local emissions test. C.A.R.B. (California Air Resources Board) has issued Executive Order numbers D-234 through D-234-6 covering all JET Performance Power Chips, making JET Performance chips the most complete line of high-performance chips that can legally be sold, installed, and driven in the state of California. Because of C.A.R.B.'s very rigid rules concerning exhaust emissions, the Environmental Protection Agency ( E.P.A. ) accepts C.A.R.B. approval as evidence that an aftermarket part is clean and suitable for use in all other 49 states.
Does JET Performance remove the speed and rev limiters?
Does JET Performance remove the speed and rev limiters? JET Performance Programmers include the option to remove the speed limter and in most cases modify the rev limiter, but JET modules will not remove the limiters. Speed limiters are based on the speed rating of the OEM tires and changing these limits are done solely at your own risk! In some cases the limiters can be removed with custom programming, contact JET with your vehicle specifications to be sure.
|
|
 |
|