|
Powermadd
ATV Risers
|
|
Raising the bars can make a big difference in comfort and control. Whether it is on a snowmobile,
ATV or motorcycle, putting the bars at the right height can ease steering, reduce back fatigue and make
it more comfortable for any ride. The best way to figure this out is by removing the top handlebar clamps
and lifting the bars to the height we want. Customize the machine to any preference and ride more comfortably.
Handlebar Risers
This Bar Riser is 2" tall and 3.25" wide to fit all snowmobiles (and some ATVs) with 7/8" bar clamps.
One peice design is made from solid aluminum for superior strength and dual pivot points provide optimum bar
positioning. Two models available - 7/8" to 7/8" for standard bars and 7/8" to 1 1/8" for converting to oversize
bars.
Bar Clamp
Bar clamps will work with any 7/8" bar for ATVs, motorcycles or snowmobiles. These may be needed if we are trying to use a PowerMadd PowerRiser 325 or 475 and the stock clamps are of a one-piece design. Sold in sets of 4.
ATV - will fit some Can Am and Polaris ATVs. Measure the distance between your clamps to see if they are 3.25" or less.
|
Power Riser 475
Fits all ATV and motorcycles, riser is 4.75" wide and requires 7/8" bar clamps. One peice design is made from solid aluminum for superior strength. Provides dual pivot points for optimum bar positioning.
Comes in two heights for two handlebar sizes:
PM15430 - 2" tall, 7/8" bars to 7/8" bars
PM15431 - 2" tall, 7/8" bars to 1 1/8" bars
PM15432 - 3" tall, 7/8" barst to 7/8" bars
PM15433 - 3" tall, 7/8" bars to 1 1/8" bars
Note: it requires 4 separate bar clamps, if the upper or lower stock bar clamp is a one piece design it will also need the
PM15470 - Universal Bar Clamps
We support our product at all levels within this structure and stand behind all of
our products 100%, so our customers can always feel secure in buying a PowerMadd product.
 |