Tough Country Deluxe Front End Replacements have a contoured appearance with special care concentrated on fit and finish. The distinguishing characteristics of our Deluxe Replacements are the larger 1-1/4" light loops, the angular front protection plates, and the added side protection of the rigid pipe base.
The Deluxe Replacements are manufactured with a heavy 4" pipe base for maximum protection and are frame mounted with no vehicle modification necessary. Our Deluxe Front Replacement is the ONLY front replacement bumper on the market today that gives you 4" pipe all the way around the front of your truck from wheel to wheel. The standard finish is a high gloss black industrial powder coat.
Tough Country Deluxe Front Bumpers do not come with receivers unless purchased and the default finish depends on the version of Black Powder coating TCB supplies
Shopping with us is simple and easy, simply click the arrow to the right of the box below to find all available products. Click on the product of your choice, then simply click the "Add to Cart" button. It is that easy!
These Options are ONLY for the TIME OF PURCHASE on the Product for which they are intended. These options can not be purchased without the purchase of the corresponding bumper or headache rack.
Tough Country 3" Body Lift Modification is a custom option wherein brackets are fabricated and welded to raise the bumper 3" high and to be compatible with a Truck equipped with 3" Body Lift. The welded construction will not compromise strength and durability compared to a bolt on adapter that is usually being equipped with most body lifts.
**Note: This option must be specified at the time the order is placed and cannot be reversed or removed.
Tough Country Flush Receiver Tube is welded in the center of the pipe base, cut off and ground smooth for a clean look on your Deluxe Front. The standard 2" receiver allows the use of other accessories such as winch cradle, cargo basket, game rack and ball mount for backing trailers in tight places.
**NOTE: The shank of your accessory must be pinned from the back of the pipe, accessed from the bottom of the bumper, and requires at least 5¼" of unobstructed shank from pin hole to ball mount platform or any gussets. This is to allow it to pass through the 4" pipe base and be pinned on the back side of the pipe base.
Tough Country Protruding Receiver Tube is a standard 2" receiver tube that is welded on and extends 2 ½" from the front pipe base. Tough Country Protruding Receiver Tube can be used alongside with any standard shank ball mount and conveniently pin or unpin the shank of your accessory from the front bumper when the need arises. Additional options can be installed like winch cradle, cargo basket, game rack or ball mount for backing trailers in tight places.
Tough Country Shackle Mounts comes with additional towing points and is suitable for attaching winch cable when using snatch block. Tough Country Shackle Mounts is constructed from ¾" CNC plasma cut steel tabs welded on to the pipe base with 1" holes to accommodate Heavy Duty ¾" Shackles.
Tough Country Expanded Metal Grill is a good option to keep the factory fog lights on the truck. Plasma cut hole is made and hand formed steel tube is welded in its place. Tough Country Expanded Metal Grill comes with custom fabricated brackets that are welded to hold the lights. The custom fabricated brackets protect the lights and give clean sleeve look.
Tough Country Shackle Hooks is a Heavy Duty ¾" Galvanized Shackles that can be bolted on to Tough Country Shackle Mounts. It can also be used to hook tow strap or snatch block.
Tough Country Winch Box comes in two variants – Universal Winch Box and Mile Marker Hydraulic Winch Box. The Universal CNC Plasma cut winch box allows the winch to remain exposed for ease of use and to keep the cable from bailing up. Tough Country Universal Winch Box is constructed from Heavy Duty 3/8" plate and pre-punched for compatibility with winches on the market.
Mile Marker Hydraulic Winch Box provides ease of use by allowing the winch to remain exposed. Just like the Universal Winch Box, it is also constructed from 3/8" plate and is smaller and more streamlined than the Universal Winch Box giving the bumper better custom look with more exact fit for the hydraulic winch. The dimensions of this winch box are 27" wide x 7" deep with a 6¼" tall face plate and accommodates Mile Marker Hydraulic Winches only.
Image(s) may not reflect the product(s) being sold.
New Customer Service Hours:
Mon - Th: 9:00am - 11:00pm EST
Fri-Sun: 9:00am - 7:00pm EST
If you have any questions just give us a call: 813-769-2451
**UNLIKE OUR COMPETITION WE HAVE NO HANDLING FEES OR HIDDEN CHARGES**