Pro Comp Tahoe Yukon Suspension Lifts

Pro Comp is globally recognized as one of the leaders in off-road technology. Since 1992 Pro Comp has been manufacturing high quality, durable products for on and off road racers and enthusiasts. Pro Comp has created value for its customers by improving product performance and integrating new technologies. Their commitment to maintaining the utmost in quality and durability is what drives them and continues to be their mission statement. From concept to reality the results are obvious. Pro Comp builds suspension systems that really work!

• Shocks: Front/Rear ES3000
• Max Tire Size: 33x12.50R15-20
• Wheel Size: 15" thru 20" x 9 rims with 4" to 5.25" BS
• Front Lift: Drop Brackets, Crossmembers
• Rear Lift: Lift Blocks & U-Bolts
• Install Time: 8-10 Hours

• Moderate to severe driveline vibration may occur at speeds above 25 mph when 4x4 Hi is engaged. Rear driveline modification may be necessary for short wheelbase vehicles
• Not recommended for 98-99 GM1500 4WD vehicles with Auto Track NP246 transfer case
• Vehicle will require alignment after kit is installed

Pro Comp is globally recognized as one of the leaders in off-road technology. Since 1992 Pro Comp has been manufacturing high quality, durable products for on and off road racers and enthusiasts. Pro Comp has created value for its customers by improving product performance and integrating new technologies. Their commitment to maintaining the utmost in quality and durability is what drives them and continues to be their mission statement. From concept to reality the results are obvious. Pro Comp builds suspension systems that really work!

• Shocks: Front/Rear ES3000
• Max Tire Size: 33x12.50R15-20
• Wheel Size: 15" thru 20" x 9 rims with 4" to 5.25" BS
• Front Lift: Drop Brackets, Crossmembers
• Rear Lift: Lift Blocks & U-Bolts
• Install Time: 8-10 Hours

• Moderate to severe driveline vibration may occur at speeds above 25 mph when 4x4 Hi is engaged. Rear driveline modification may be necessary for short wheelbase vehicles
• Not recommended for 98-99 GM1500 4WD vehicles with Auto Track NP246 transfer case
• Vehicle will require alignment after kit is installed

Pro Comp is globally recognized as one of the leaders in off-road technology. Since 1992 Pro Comp has been manufacturing high quality, durable products for on and off road racers and enthusiasts. Pro Comp has created value for its customers by improving product performance and integrating new technologies. Their commitment to maintaining the utmost in quality and durability is what drives them and continues to be their mission statement. From concept to reality the results are obvious. Pro Comp builds suspension systems that really work!

• Lift Height: 6 Inches
• Front Lift: Strut Spacers
• Front/Rear Crossmembers
• Compression Struts
• Spindles
• Front Sway Bar Links
• Bump Stops
• Torsion Bar Drop Brackets
• Steering Correction: Steering Drop/Centerlink
• Brake Line Extension Brackets
• Rear Lift: Coils
• Shocks: Rear ES9000 Shocks
• Shock Boots Not Included
• Max Tire Size: 35X12.50
• Wheel Size Range (Inches) 17-20
• Wheel Width Range (Inches) 8-9
• Min-Max Backspace (Inches) 4.0-5.5

• Fits: 95-99 Tahoe/Yukon 1500 4WD
• Shocks: Front/Rear ES3000
• Max Tire Size: 35x12.50R15-20
• Wheel Size: 15" thru 20" x 9 rims with 4" to 5.25" BS
• Front Lift: Drop Brackets, Crossmembers
• Rear Lift: Lift Block, U-Bolts & Add-A-Leaf
• Install Time: 8-10 Hours

• Moderate to severe driveline vibration may occur at speeds above 25 mph when 4x4 Hi is engaged. Rear driveline modification may be necessary for short wheelbase vehicles
• Not recommended for 98-99 GM1500 4WD vehicles with Auto Track NP246 transfer case
• Vehicle will require alignment after kit is installed

Pro Comp is globally recognized as one of the leaders in off-road technology. Since 1992 Pro Comp has been manufacturing high quality, durable products for on and off road racers and enthusiasts. Pro Comp has created value for its customers by improving product performance and integrating new technologies. Their commitment to maintaining the utmost in quality and durability is what drives them and continues to be their mission statement. From concept to reality the results are obvious. Pro Comp builds suspension systems that really work!

• Lift Height: 6 Inches
• Front Lift: Strut Spacers
• Front/Rear Crossmembers
• Compression Struts
• Spindles
• Front Sway Bar Links
• Bump Stops
• Torsion Bar Drop Brackets
• Steering Correction: Steering Drop/Centerlink
• Brake Line Extension Brackets
• Rear Lift: Coils
• Shocks: Rear ES9000 Shocks
• Shock Boots Not Included
• Max Tire Size: 35X12.50
• Wheel Size Range (Inches) 17-20
• Wheel Width Range (Inches) 8-9
• Min-Max Backspace (Inches) 4.0-5.5

• Fits: 95-99 Tahoe/Yukon 1500 4WD
• Shocks: Front/Rear ES3000
• Max Tire Size: 35x12.50R15-20
• Wheel Size: 15" thru 20" x 9 rims with 4" to 5.25" BS
• Front Lift: Drop Brackets, Crossmembers
• Rear Lift: Lift Block, U-Bolts & Add-A-Leaf
• Install Time: 8-10 Hours

• Moderate to severe driveline vibration may occur at speeds above 25 mph when 4x4 Hi is engaged. Rear driveline modification may be necessary for short wheelbase vehicles
• Not recommended for 98-99 GM1500 4WD vehicles with Auto Track NP246 transfer case
• Vehicle will require alignment after kit is installed

Pro Comp is globally recognized as one of the leaders in off-road technology. Since 1992 Pro Comp has been manufacturing high quality, durable products for on and off road racers and enthusiasts. Pro Comp has created value for its customers by improving product performance and integrating new technologies. Their commitment to maintaining the utmost in quality and durability is what drives them and continues to be their mission statement. From concept to reality the results are obvious. Pro Comp builds suspension systems that really work!

• Lift Height: 6 Inches
• Front Lift: Strut Spacers
• Front/Rear Crossmembers
• Compression Struts
• Spindles
• Front Sway Bar Links
• Bump Stops
• Torsion Bar Drop Brackets
• Steering Correction: Steering Drop/Centerlink
• Brake Line Extension Brackets
• Rear Lift: Coils
• Shocks: Rear ES9000 Shocks
• Shock Boots Not Included
• Max Tire Size: 35X12.50
• Wheel Size Range (Inches) 17-20
• Wheel Width Range (Inches) 8-9
• Min-Max Backspace (Inches) 4.0-5.5

• Fits: 95-99 Tahoe/Yukon 1500 4WD
• Shocks: Front/Rear ES3000
• Max Tire Size: 35x12.50R15-20
• Wheel Size: 15" thru 20" x 9 rims with 4" to 5.25" BS
• Front Lift: Drop Brackets, Crossmembers
• Rear Lift: Lift Block, U-Bolts & Add-A-Leaf
• Install Time: 8-10 Hours

• Moderate to severe driveline vibration may occur at speeds above 25 mph when 4x4 Hi is engaged. Rear driveline modification may be necessary for short wheelbase vehicles
• Not recommended for 98-99 GM1500 4WD vehicles with Auto Track NP246 transfer case
• Vehicle will require alignment after kit is installed

Pro Comp is globally recognized as one of the leaders in off-road technology. Since 1992 Pro Comp has been manufacturing high quality, durable products for on and off road racers and enthusiasts. Pro Comp has created value for its customers by improving product performance and integrating new technologies. Their commitment to maintaining the utmost in quality and durability is what drives them and continues to be their mission statement. From concept to reality the results are obvious. Pro Comp builds suspension systems that really work!

• Shocks: Front Strut Spacer/Rear ES9000
• Max Tire Size: 35x12.50R17-20, 315/70R17, 305/70R18, 325/65R18, 295/60R20
• Wheel Size: 17x9 w 4.5" BS
• 18x9 w 5"BS
• 20x9 w 5"BS
• Front Lift: Knuckles, Crossmembers
• Rear Lift: Coil Springs
• Install Time: 6-8 Hours

• Shocks: Front/Rear ES9000
• Max Tire Size: 35x12.50R17-20
• Wheel Size: 17x9 w 4.5-5" BS
• 18x9 w 5-5.7"BS
• 20x9 w 5-5.7"BS
• Front Lift: Drop Brackets, Crossmembers
• Rear Lift: Coil Springs
• Install Time: 8-10 Hours

• A replacement CV front driveshaft is recommended for extended high speed use in 4x4 high or AUTO 4x4. GM vehicles with push button 4x4 high activation (Auto Trac) use 51256 (measures 37.81" from U-joint center to end of slip joint) GM vehicles with All Wheel Drive will require 51257 (measures 36.81" from U-joint center to end of slip joint)
• OE Wheels can be used.
• 2000-2004 vehicles must use 16" or larger diameter rims. 2005-2006 vehicles must use 17" or larger diameter rims
• Vehicle will require alignment after kit is installed.
• Tie Rod Reinforcement kit threads directly onto the factory tie rods to provide extra support for GM vehicles epuipped with over-sized tires and wheels.

Pro Comp is globally recognized as one of the leaders in off-road technology. Since 1992 Pro Comp has been manufacturing high quality, durable products for on and off road racers and enthusiasts. Pro Comp has created value for its customers by improving product performance and integrating new technologies. Their commitment to maintaining the utmost in quality and durability is what drives them and continues to be their mission statement. From concept to reality the results are obvious. Pro Comp builds suspension systems that really work!

• Shocks: Front Strut Spacer/Rear ES9000
• Max Tire Size: 35x12.50R17-20, 315/70R17, 305/70R18, 325/65R18, 295/60R20
• Wheel Size: 17x9 w 4.5" BS
• 18x9 w 5"BS
• 20x9 w 5"BS
• Front Lift: Knuckles, Crossmembers
• Rear Lift: Coil Springs
• Install Time: 6-8 Hours

• Shocks: Front/Rear ES9000
• Max Tire Size: 35x12.50R17-20
• Wheel Size: 17x9 w 4.5-5" BS
• 18x9 w 5-5.7"BS
• 20x9 w 5-5.7"BS
• Front Lift: Drop Brackets, Crossmembers
• Rear Lift: Coil Springs
• Install Time: 8-10 Hours

• A replacement CV front driveshaft is recommended for extended high speed use in 4x4 high or AUTO 4x4. GM vehicles with push button 4x4 high activation (Auto Trac) use 51256 (measures 37.81" from U-joint center to end of slip joint) GM vehicles with All Wheel Drive will require 51257 (measures 36.81" from U-joint center to end of slip joint)
• OE Wheels can be used.
• 2000-2004 vehicles must use 16" or larger diameter rims. 2005-2006 vehicles must use 17" or larger diameter rims
• Vehicle will require alignment after kit is installed.
• Tie Rod Reinforcement kit threads directly onto the factory tie rods to provide extra support for GM vehicles epuipped with over-sized tires and wheels.

Pro Comp is globally recognized as one of the leaders in off-road technology. Since 1992 Pro Comp has been manufacturing high quality, durable products for on and off road racers and enthusiasts. Pro Comp has created value for its customers by improving product performance and integrating new technologies. Their commitment to maintaining the utmost in quality and durability is what drives them and continues to be their mission statement. From concept to reality the results are obvious. Pro Comp builds suspension systems that really work!

• Steering Knuckles
• Drop Crossmembers
• Differential Skid Plate
• Diff Drop Brackets
• Sway Bar Drops
• Rear Sway Bar End Links
• Related Hardware
• Rear Coils
• Rear Track Bar Brackets
• Rear Control Arm Brackets
• Front Strut Spacers and Rear ES Shocks

• Precision laser-cut radius arm drop brackets correct the steering geometry
• Provides a smooth, comfortable ride quality
• Maximize tire clearance and offroad prowess
• Constructed out of precision laser cut 3/16” steel
• Durable black powder coat finish for protection

• Must use 17" or larger diameter rims.17" rims not to exceed 4.625" backspacing. 18" to 20" rims not to exceed 5.00" backspacing
• Excludes Magnetic Ride Control (LTZ) and Max Trailering package or any model with Air / Electronic / Hydraulic ride adjusting features
• 2wd models with one-piece driveshaft will require a longer custom drive shaft to maintain specified slip yoke engagement
• Vehicle will require alignment after kit is installed
• Hub centric rings, PN PXAHR1081, are recommended for use of Pro Comp rims on 14-16 GM 1500 vehicles. Use HR1082 with push through caps
• Use Sway bar end link brackets 90-60616B if vehicle has stamped steel upper and lower arms

Pro Comp is globally recognized as one of the leaders in off-road technology. Since 1992 Pro Comp has been manufacturing high quality, durable products for on and off road racers and enthusiasts. Pro Comp has created value for its customers by improving product performance and integrating new technologies. Their commitment to maintaining the utmost in quality and durability is what drives them and continues to be their mission statement. From concept to reality the results are obvious. Pro Comp builds suspension systems that really work!

• Steering Knuckles
• Drop Crossmembers
• Differential Skid Plate
• Diff Drop Brackets
• Sway Bar Drops
• Rear Sway Bar End Links
• Related Hardware
• Rear Coils
• Rear Track Bar Brackets
• Rear Control Arm Brackets
• Front Strut Spacers and Rear ES Shocks

• Precision laser-cut radius arm drop brackets correct the steering geometry
• Provides a smooth, comfortable ride quality
• Maximize tire clearance and offroad prowess
• Constructed out of precision laser cut 3/16” steel
• Durable black powder coat finish for protection

• Must use 17" or larger diameter rims.17" rims not to exceed 4.625" backspacing. 18" to 20" rims not to exceed 5.00" backspacing
• Excludes Magnetic Ride Control (LTZ) and Max Trailering package or any model with Air / Electronic / Hydraulic ride adjusting features
• 2wd models with one-piece driveshaft will require a longer custom drive shaft to maintain specified slip yoke engagement
• Vehicle will require alignment after kit is installed
• Hub centric rings, PN PXAHR1081, are recommended for use of Pro Comp rims on 14-16 GM 1500 vehicles. Use HR1082 with push through caps
• Use Sway bar end link brackets 90-60616B if vehicle has stamped steel upper and lower arms

Pro Comp is globally recognized as one of the leaders in off-road technology. Since 1992 Pro Comp has been manufacturing high quality, durable products for on and off road racers and enthusiasts. Pro Comp has created value for its customers by improving product performance and integrating new technologies. Their commitment to maintaining the utmost in quality and durability is what drives them and continues to be their mission statement. From concept to reality the results are obvious. Pro Comp builds suspension systems that really work!

• Steering Knuckles
• Drop Crossmembers
• Differential Skid Plate
• Diff Drop Brackets
• Sway Bar Drops
• Rear Sway Bar End Links
• Related Hardware
• Rear Coils
• Rear Track Bar Brackets
• Rear Control Arm Brackets
• Front Strut Spacers and Rear ES Shocks

• Precision laser-cut radius arm drop brackets correct the steering geometry
• Provides a smooth, comfortable ride quality
• Maximize tire clearance and offroad prowess
• Constructed out of precision laser cut 3/16” steel
• Durable black powder coat finish for protection

• Must use 17" or larger diameter rims.17" rims not to exceed 4.625" backspacing. 18" to 20" rims not to exceed 5.00" backspacing
• Excludes Magnetic Ride Control (LTZ) and Max Trailering package or any model with Air / Electronic / Hydraulic ride adjusting features
• 2wd models with one-piece driveshaft will require a longer custom drive shaft to maintain specified slip yoke engagement
• Vehicle will require alignment after kit is installed
• Hub centric rings, PN PXAHR1081, are recommended for use of Pro Comp rims on 14-16 GM 1500 vehicles. Use HR1082 with push through caps
• Use Sway bar end link brackets 90-60616B if vehicle has stamped steel upper and lower arms

Pro Comp is globally recognized as one of the leaders in off-road technology. Since 1992 Pro Comp has been manufacturing high quality, durable products for on and off road racers and enthusiasts. Pro Comp has created value for its customers by improving product performance and integrating new technologies. Their commitment to maintaining the utmost in quality and durability is what drives them and continues to be their mission statement. From concept to reality the results are obvious. Pro Comp builds suspension systems that really work!

• Steering Knuckles
• Drop Crossmembers
• Differential Skid Plate
• Diff Drop Brackets
• Sway Bar Drops
• Rear Sway Bar End Links
• Related Hardware
• Rear Coils
• Rear Track Bar Brackets
• Rear Control Arm Brackets
• Front Strut Spacers and Rear ES Shocks

• Precision laser-cut radius arm drop brackets correct the steering geometry
• Provides a smooth, comfortable ride quality
• Maximize tire clearance and offroad prowess
• Constructed out of precision laser cut 3/16” steel
• Durable black powder coat finish for protection

• Must use 17" or larger diameter rims.17" rims not to exceed 4.625" backspacing. 18" to 20" rims not to exceed 5.00" backspacing
• Excludes Magnetic Ride Control (LTZ) and Max Trailering package or any model with Air / Electronic / Hydraulic ride adjusting features
• 2wd models with one-piece driveshaft will require a longer custom drive shaft to maintain specified slip yoke engagement
• Vehicle will require alignment after kit is installed
• Hub centric rings, PN PXAHR1081, are recommended for use of Pro Comp rims on 14-16 GM 1500 vehicles. Use HR1082 with push through caps
• Use Sway bar end link brackets 90-60616B if vehicle has stamped steel upper and lower arms

Pro Comp is globally recognized as one of the leaders in off-road technology. Since 1992 Pro Comp has been manufacturing high quality, durable products for on and off road racers and enthusiasts. Pro Comp has created value for its customers by improving product performance and integrating new technologies. Their commitment to maintaining the utmost in quality and durability is what drives them and continues to be their mission statement. From concept to reality the results are obvious. Pro Comp builds suspension systems that really work!

• Steering Knuckles
• Drop Crossmembers
• Differential Skid Plate
• Diff Drop Brackets
• Sway Bar Drops
• Rear Sway Bar End Links
• Related Hardware
• Rear Coils
• Rear Track Bar Brackets
• Rear Control Arm Brackets
• Front Strut Spacers and Rear ES Shocks

• Precision laser-cut radius arm drop brackets correct the steering geometry
• Provides a smooth, comfortable ride quality
• Maximize tire clearance and offroad prowess
• Constructed out of precision laser cut 3/16” steel
• Durable black powder coat finish for protection

• Must use 17" or larger diameter rims.17" rims not to exceed 4.625" backspacing. 18" to 20" rims not to exceed 5.00" backspacing
• Excludes Magnetic Ride Control (LTZ) and Max Trailering package or any model with Air / Electronic / Hydraulic ride adjusting features
• 2wd models with one-piece driveshaft will require a longer custom drive shaft to maintain specified slip yoke engagement
• Vehicle will require alignment after kit is installed
• Hub centric rings, PN PXAHR1081, are recommended for use of Pro Comp rims on 14-16 GM 1500 vehicles. Use HR1082 with push through caps
• Use Sway bar end link brackets 90-60616B if vehicle has stamped steel upper and lower arms

Pro Comp is globally recognized as one of the leaders in off-road technology. Since 1992 Pro Comp has been manufacturing high quality, durable products for on and off road racers and enthusiasts. Pro Comp has created value for its customers by improving product performance and integrating new technologies. Their commitment to maintaining the utmost in quality and durability is what drives them and continues to be their mission statement. From concept to reality the results are obvious. Pro Comp builds suspension systems that really work!

• Steering Knuckles
• Drop Crossmembers
• Differential Skid Plate
• Diff Drop Brackets
• Sway Bar Drops
• Rear Sway Bar End Links
• Related Hardware
• Rear Coils
• Rear Track Bar Brackets
• Rear Control Arm Brackets
• Front Strut Spacers and Rear ES Shocks

• Precision laser-cut radius arm drop brackets correct the steering geometry
• Provides a smooth, comfortable ride quality
• Maximize tire clearance and offroad prowess
• Constructed out of precision laser cut 3/16” steel
• Durable black powder coat finish for protection

• Must use 17" or larger diameter rims.17" rims not to exceed 4.625" backspacing. 18" to 20" rims not to exceed 5.00" backspacing
• Excludes Magnetic Ride Control (LTZ) and Max Trailering package or any model with Air / Electronic / Hydraulic ride adjusting features
• 2wd models with one-piece driveshaft will require a longer custom drive shaft to maintain specified slip yoke engagement
• Vehicle will require alignment after kit is installed
• Hub centric rings, PN PXAHR1081, are recommended for use of Pro Comp rims on 14-16 GM 1500 vehicles. Use HR1082 with push through caps
• Use Sway bar end link brackets 90-60616B if vehicle has stamped steel upper and lower arms

Pro Comp is globally recognized as one of the leaders in off-road technology. Since 1992 Pro Comp has been manufacturing high quality, durable products for on and off road racers and enthusiasts. Pro Comp has created value for its customers by improving product performance and integrating new technologies. Their commitment to maintaining the utmost in quality and durability is what drives them and continues to be their mission statement. From concept to reality the results are obvious. Pro Comp builds suspension systems that really work!

• Steering Knuckles
• Drop Crossmembers
• Differential Skid Plate
• Diff Drop Brackets
• Sway Bar Drops
• Rear Sway Bar End Links
• Related Hardware
• Rear Coils
• Rear Track Bar Brackets
• Rear Control Arm Brackets
• Front Strut Spacers and Rear ES Shocks

• Precision laser-cut radius arm drop brackets correct the steering geometry
• Provides a smooth, comfortable ride quality
• Maximize tire clearance and offroad prowess
• Constructed out of precision laser cut 3/16” steel
• Durable black powder coat finish for protection

• Must use 17" or larger diameter rims.17" rims not to exceed 4.625" backspacing. 18" to 20" rims not to exceed 5.00" backspacing
• Excludes Magnetic Ride Control (LTZ) and Max Trailering package or any model with Air / Electronic / Hydraulic ride adjusting features
• 2wd models with one-piece driveshaft will require a longer custom drive shaft to maintain specified slip yoke engagement
• Vehicle will require alignment after kit is installed
• Hub centric rings, PN PXAHR1081, are recommended for use of Pro Comp rims on 14-16 GM 1500 vehicles. Use HR1082 with push through caps
• Use Sway bar end link brackets 90-60616B if vehicle has stamped steel upper and lower arms

Pro Comp is globally recognized as one of the leaders in off-road technology. Since 1992 Pro Comp has been manufacturing high quality, durable products for on and off road racers and enthusiasts. Pro Comp has created value for its customers by improving product performance and integrating new technologies. Their commitment to maintaining the utmost in quality and durability is what drives them and continues to be their mission statement. From concept to reality the results are obvious. Pro Comp builds suspension systems that really work!

• Steering Knuckles
• Drop Crossmembers
• Differential Skid Plate
• Diff Drop Brackets
• Sway Bar Drops
• Rear Sway Bar End Links
• Related Hardware
• Rear Coils
• Rear Track Bar Brackets
• Rear Control Arm Brackets
• Front Strut Spacers and Rear ES Shocks

• Precision laser-cut radius arm drop brackets correct the steering geometry
• Provides a smooth, comfortable ride quality
• Maximize tire clearance and offroad prowess
• Constructed out of precision laser cut 3/16” steel
• Durable black powder coat finish for protection

• Must use 17" or larger diameter rims.17" rims not to exceed 4.625" backspacing. 18" to 20" rims not to exceed 5.00" backspacing
• Excludes Magnetic Ride Control (LTZ) and Max Trailering package or any model with Air / Electronic / Hydraulic ride adjusting features
• 2wd models with one-piece driveshaft will require a longer custom drive shaft to maintain specified slip yoke engagement
• Vehicle will require alignment after kit is installed
• Hub centric rings, PN PXAHR1081, are recommended for use of Pro Comp rims on 14-16 GM 1500 vehicles. Use HR1082 with push through caps
• Use Sway bar end link brackets 90-60616B if vehicle has stamped steel upper and lower arms

Pro Comp is globally recognized as one of the leaders in off-road technology. Since 1992 Pro Comp has been manufacturing high quality, durable products for on and off road racers and enthusiasts. Pro Comp has created value for its customers by improving product performance and integrating new technologies. Their commitment to maintaining the utmost in quality and durability is what drives them and continues to be their mission statement. From concept to reality the results are obvious. Pro Comp builds suspension systems that really work!

• Steering Knuckles
• Drop Crossmembers
• Differential Skid Plate
• Diff Drop Brackets
• Sway Bar Drops
• Rear Sway Bar End Links
• Related Hardware
• Rear Coils
• Rear Track Bar Brackets
• Rear Control Arm Brackets
• Front Strut Spacers and Rear ES Shocks

• Precision laser-cut radius arm drop brackets correct the steering geometry
• Provides a smooth, comfortable ride quality
• Maximize tire clearance and offroad prowess
• Constructed out of precision laser cut 3/16” steel
• Durable black powder coat finish for protection

• Must use 17" or larger diameter rims.17" rims not to exceed 4.625" backspacing. 18" to 20" rims not to exceed 5.00" backspacing
• Excludes Magnetic Ride Control (LTZ) and Max Trailering package or any model with Air / Electronic / Hydraulic ride adjusting features
• 2wd models with one-piece driveshaft will require a longer custom drive shaft to maintain specified slip yoke engagement
• Vehicle will require alignment after kit is installed
• Hub centric rings, PN PXAHR1081, are recommended for use of Pro Comp rims on 14-16 GM 1500 vehicles. Use HR1082 with push through caps
• Use Sway bar end link brackets 90-60616B if vehicle has stamped steel upper and lower arms

Pro Comp is globally recognized as one of the leaders in off-road technology. Since 1992 Pro Comp has been manufacturing high quality, durable products for on and off road racers and enthusiasts. Pro Comp has created value for its customers by improving product performance and integrating new technologies. Their commitment to maintaining the utmost in quality and durability is what drives them and continues to be their mission statement. From concept to reality the results are obvious. Pro Comp builds suspension systems that really work!

• Steering Knuckles
• Drop Crossmembers
• Differential Skid Plate
• Diff Drop Brackets
• Sway Bar Drops
• Rear Sway Bar End Links
• Related Hardware
• Rear Coils
• Rear Track Bar Brackets
• Rear Control Arm Brackets
• Front Strut Spacers and Rear ES Shocks

• Precision laser-cut radius arm drop brackets correct the steering geometry
• Provides a smooth, comfortable ride quality
• Maximize tire clearance and offroad prowess
• Constructed out of precision laser cut 3/16” steel
• Durable black powder coat finish for protection

• Must use 17" or larger diameter rims.17" rims not to exceed 4.625" backspacing. 18" to 20" rims not to exceed 5.00" backspacing
• Excludes Magnetic Ride Control (LTZ) and Max Trailering package or any model with Air / Electronic / Hydraulic ride adjusting features
• 2wd models with one-piece driveshaft will require a longer custom drive shaft to maintain specified slip yoke engagement
• Vehicle will require alignment after kit is installed
• Hub centric rings, PN PXAHR1081, are recommended for use of Pro Comp rims on 14-16 GM 1500 vehicles. Use HR1082 with push through caps
• Use Sway bar end link brackets 90-60616B if vehicle has stamped steel upper and lower arms

Pro Comp is globally recognized as one of the leaders in off-road technology. Since 1992 Pro Comp has been manufacturing high quality, durable products for on and off road racers and enthusiasts. Pro Comp has created value for its customers by improving product performance and integrating new technologies. Their commitment to maintaining the utmost in quality and durability is what drives them and continues to be their mission statement. From concept to reality the results are obvious. Pro Comp builds suspension systems that really work!

• Steering Knuckles
• Drop Crossmembers
• Differential Skid Plate
• Diff Drop Brackets
• Sway Bar Drops
• Rear Sway Bar End Links
• Related Hardware
• Rear Coils
• Rear Track Bar Brackets
• Rear Control Arm Brackets
• Front Strut Spacers and Rear ES Shocks

• Precision laser-cut radius arm drop brackets correct the steering geometry
• Provides a smooth, comfortable ride quality
• Maximize tire clearance and offroad prowess
• Constructed out of precision laser cut 3/16” steel
• Durable black powder coat finish for protection

• Must use 17" or larger diameter rims.17" rims not to exceed 4.625" backspacing. 18" to 20" rims not to exceed 5.00" backspacing
• Excludes Magnetic Ride Control (LTZ) and Max Trailering package or any model with Air / Electronic / Hydraulic ride adjusting features
• 2wd models with one-piece driveshaft will require a longer custom drive shaft to maintain specified slip yoke engagement
• Vehicle will require alignment after kit is installed
• Hub centric rings, PN PXAHR1081, are recommended for use of Pro Comp rims on 14-16 GM 1500 vehicles. Use HR1082 with push through caps
• Use Sway bar end link brackets 90-60616B if vehicle has stamped steel upper and lower arms