|
PIAA Lamp Aiming Guide
 |
Proper auxiliary
lamp aiming is the most important part of an installation. If the lamps
are not properly aimed they will not achieve optimum performance and they
can be very dangerous. The danger comes from the beam pattern being aimed
right into oncoming vehicles thus blinding the driver. Check the Lamp Selection
Guide on page 4 for the definitions of different types of lights and their
intended use. |
Fog/Foul Weather Lights
Traditional fog lights are usually mounted under the front bumper about 10-24
inches from the ground. There are two important issues to address when installing
fog lights, the first is to minimize the amount of return glare into the driver's
eyes, and the other is to minimize glare into oncoming driver's eyes. Both must
be accomplished while putting as much light as possible on the road.
These fog/foul weather light aiming instructions are suggestions taken from common
practice and the S.A.E. standard J583. Some modifications to these instructions
may be necessary to minimize glare.
Visual aim is made with the top of the beam 4 inches below the lamp center at
25 feet with the lamp facing straight forward. (See below.)
Driving Lights
Typically, driving lights are mounted above the front bumper about 14-30 inches from the ground to provide extra high beam illumination. Driving lights can be mounted below the bumper, although they will not be as effective because the light will hit the ground sooner and reduce the range of the light.
Visual aim is made with the center of the beam hot spot 1.5 inches below the lamp center at 25 feet with the lamp facing straight forward. (See below.)
The PIAA Corporation was established in 1963 with the commitment to manufacture world-class products that our customers could use with pride and confidence.
Today, PIAA upholds that commitment by combining market driven concepts with the latest technology to make night and inclement weather driving as safe as possible.
|