|
Hypertech Temperature Module
1996 - 2003 Ford
7.3L Powerstroke
KEY FEATURES:
• Add EGT to any of the Gauge Panel Options in the Engine Monitor Section
• Select Analog or Digital Display
• Allows User to Set Alarms for Upper and Lower Temperature Levels
• User can be Alerted with Beeps or Screen Warnings
• Temperature Monitoring Range from -300F to 2400F
• Temperatures can be recorded via HyperPAC
|
 |
Diesels can develop so much exhaust heat that they can self-destruct. To keep that from happening, you must monitor Exhaust Gas Temperature or EGT. All Hypertech tuning for diesels is developed to keep the EGT at approximately 1350 degrees Fahrenheit, even when towing maximum loads. But if you have made other modifications, or if you experience a component failure (such as an injector malfunction, a common occurrence) you need to know immediately if unsafe operating conditions are occurring so you can save your engine, and your wallet, from serious damage.
The HyperPAC and a Hypertech Temperature Module will not only let you read your EGT, it will constantly monitor EGT even when you are not looking. The HyperPAC allows you to set an upper limit for EGT, and if that limit is exceeded, an audible alert will sound and a warning will appear on the screen. For the HyperPAC to read EGT you first have to install the Temperature Module. Installation is simple, but you will have to install a fitting into your exhaust manifold just before the turbo. But everything else is easy, just plug and play. Screw the temperature sensor into the fitting, plug the sensor cable into the Temperature Module, and then connect the Temperature Module to your HyperPAC with the connector cable. Thats all there is to it.
|