Outlast and Outperform the Competition with Skyjacker Softride® Leaf Springs for Ford

Premium quality may cost more but Skyjacker has done justice for the extra price of their Softride® Leaf Springs for Ford. Other cheap leaf springs may give performance roughly at-par with the Softride® Leaf Springs but they are no match for Skyjacker's durability when it comes to their Softride® Leaf Springs. Stop replacing old and weary cheap leaf springs, the Skyjacker Softride® Leaf Springs for Ford is the only leaf spring you will EVER install on your Ford truck. Every Skyjacker Softride® Leaf Springs are 100% manufactured and assembled in the U.S.A and it uses only the best materials and latest breakthrough in steel leaf spring fabrication. The Skyjacker Softride® Leaf Springs will outlast and outperform the competition because of its high quality materials and state-of-the-art manufacturing process that delivers flexible ride with the toughness and durability Skyjacker has been known for. Why buy a cheap set of springs and then have to replace them in a couple of years. Add a set of Skyjacker Soft Ride Leaf Springs and get the job done right the first time. Skyjacker Softride® Leaf Springs are so tough they can outlast even the vehicle itself.

Dominate the pavement and any off-road environment with the Skyjacker Softride® Leaf Springs for your Ford truck. The Skyjacker Softride® Leaf Springs are within 10% of the OEM spring rate for the softest ride around, and eliminates the creaking sounds that you will certainly experience with cheap and low quality leaf springs with its bolt style clips with Teflon sliders. Get that top notch off-road handling and smooth road riding experience with Skyjacker Softride® Leaf Springs now for smooth street level riding performance and dynamic off-road handling that you need.

Softride® By Skyjacker®
Softride® Technology gives you all the vigorous off-road handling needed while providing the smooth street riding characteristics that you demand. Skyjacker's® advanced method of shotpeening, tapered, leafs, Teflon® wear pads and 'presetting' process achieves articulation at its best...without sacrificing the life of the spring.

Softride® springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring.

Softride® springs use ‘bolt’ style spring clips, eliminating friction. Other spring designs use the ‘cinch’ style bend clips which bend tightly over the spring leafs causing binding and friction.

Skyjacker® Softride® springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.

Rear Softride® springs are used to complete the ‘SYSTEM’ in a Skyjacker® suspension lift.

Fitted Leafs are designed as an option Exclusively for Skyjacker® Softride® Lifted Leaf Springs. These are used when the additional weight of aftermarket accessories are installed such as a heavy winch bumper, an engine conversion, a swing-away tire carrier, all your extra gear, etc.).