* Tonneau cover impedes operation of OE Bed Extender option.
** 88-04 Chevy StepSide and 93-03 Ranger Flareside requires drilling holes to mount Rails.
*** 67-87 Chevy C/K Fleetside requires additional Rail Shims (included).
**** Requires removal of factory installed sliding tie down bars.
(*1) Raised Top Cover on the canister due to truck bed size. Will impede the use of the tie down system.
(*2) Will impede the use of the factory tie down system.
^ Excludes Composite box.

• Weather resistant padded polymer cover laminated to rigid aluminum panels.
• 100% no-drill advanced mounting system.
• Superior scratch resistant finish on aluminum trim.
• Multiple locking positions (every 12 inches) on long and short bed versions.
• Advanced low profile latch-handle system off set to driver side.
• Independent latch and lock mechanism with built in pull strap.

Check out the versatile new Explorer Series bed rails. Now you can have a solid and secure retractable hard tonneau cover AND removable Contractor/Utility or Sport Rig Rack systems!

Secure and protect valuable gear below the tonneau cover while you carry large equipment or supplies above. Black powder-coated extruded aluminum rails feature keyhole-style channels to instantly secure exchangeable utility or sport rig rack mounts.

Pace Edwards exclusive Explorer Series rails install quickly and easily with no-drill clamps.

• NEW! rail system designed to accommodate the NEW! Contractor Rig, Utility Rig and Multi-Sport Systems with the JackRabbit and Bedlocker retractable tonneau covers.
• The simple installation of these rails keep the tonneau cover working properly, while accommodating a Utility Rig Rack, Contractor Rig Rack, or MultiSport Rack system.
• For use with Pace Edwards Bedlocker and JackRabbit tonneau covers.
• Secure and protect valuable equipment in the truck bed, while simultaniously carrying recreational gear above the cover.
• Black powder coated extruded aluminu rails feature keyhole-style channels to instantly secure the utility or sport rig mounts in any position.
• Strong and durable for frequent use.
• Install quickly and easily using the SpeedClamp (no drilling required).

Full-Metal JackRabbit Frequently Asked Questions How does the Full-Metal JackRabbit work? • How does the Full-Metal JackRabbit work? The Full-Metal JackRabbit cover slides along rails mounted to the sides of the truck bed into a canister at the front of the truck bed. The Full-Metal JackRabbit blanket rolls around a reel inside the canister with the help of a coil spring which maintains tension on the cover at all times making it easy to open. The canister measures 9.6” wide by 9.66” high. What is the Full-Metal JackRabbit “blanket” made of? • What is the Full-Metal JackRabbit “blanket” made of? The Full-Metal JackRabbit is manufactured out of heavy gauge extruded aluminum panels with a black textured powder coat finish for increased strength and durability that are fastened together with a patented silicone hinge seal. Will the cover keep the truck bed dry? What about ice and snow? • Will the cover keep the truck bed dry? What about ice and snow? The Full-Metal JackRabbit is designed so that water collected on the top is carried to the canister. Drain tubes located at the base of the canister then take the water outside the truck, to help keep your truck bed dry. Water cannot pass through the top of the cover, however water may intrude into the bed via components that are not part of the Full-Metal JackRabbit such as the tailgate, stake pockets, etc. These components require proper sealing during installation. Pace Edwards does not claim that their covers are 100% waterproof and have never heard of a competitors cover that is either. Be very cautious if a manufacturer says that their retractable cover is 100% waterproof. Snow should be swept off of the cover with a broom before operating the cover otherwise you will end up with the snow in the truck bed. Ice can be removed by taking your hand and smacking the cover as close to the middle as possible this will cause a vibration in the cover that breaks up the ice making it easy to remove. Do not use anything but your hand for this. Is the cover hard to install? How long will installation take? • Is the cover hard to install? How long will installation take? Installation is easy. All parts are an exact match to your truck – no cutting necessary! Installation should take 15 minutes for the professional and under 30 minutes for a first time installer. See the installation instructions here. How does the Full-Metal JackRabbit lock? • How does the Full-Metal JackRabbit lock? The Full-Metal JackRabbit locks with a key Offset to the driver’s side near the tailgate. The key turns arms that lock into the side rails mounted on the sides of the truck bed. The Full-Metal JackRabbit can be locked in place at 12 inch intervals along the truck bed. Will the cover improve my gas mileage? How? • Will the cover improve my gas mileage? How? Your gas mileage should improve between 7% and 10% on the highway, with the cover closed on the bed (except when towing). A university study shows substantial gas mileage improvement whenever the box of a pickup is covered. See the press release information on gas mileage savings here. Will the cover work with my bedliner? • Will the cover work with my bedliner? The rails on our cover are designed to fasten directly on the sill of the truck bed. If you have a bedliner that covers the sill, modification will be required. Most under-the-rail bedliners are more easily fitted with our cover, but may also require modification near the front corners. See Bedliner modification sheet here. Is there a warranty on the Full-Metal JackRabbit? • Is there a warranty on the Full-Metal JackRabbit? Yes, there is a three-year factory defect warranty on all parts. See warranty statement here. Full-Metal JackRabbit Care and Maintenance To assure quiet, smooth operation, apply a small amount of grease to the wear strips where the metal end of the panels and the wear strips meet. This initial application should be sufficient for a year or more. Regrease the wear strips if the cover begins squeaking during use. It is important to open and close the cover regularly; the spring that operates the cover is self-lubricated and regular use assures that it stays in proper working condition. After installation, if the cover is tight or hard to open and close, the shimming may need to be redone. Over a period of time, if the cover becomes difficult to move in or out (particularly on hot days), check that the side-to-side clearance on the Full-Metal JackRabbit is set at least 1/8” on each side. Drain tubes may become clogged over time and should be removed and cleaned. Periodically remove the top cover and clean out the canister. To help keep the Full-Metal JackRabbit retractable tonneau cover looking its best, we recommend washing it the same as caring for your truck finish. However due to the hammer texture, removal of wax can be difficult so you should not wax your cover.