 |
|
Mag-Hytec Transmission Pans and Differential Covers
|
|
|
Heavy Duty differential covers and transmission pans provide increased lubricant and cooling capacity for hard working recreational and service vehicles. Mag-Hytec covers and pans set your vehicle apart in both aesthetics and function - cast in A356-T6 aluminum and texture powder coated black with machined cooling fins. Magnetic drain plugs trap worn gear material promoting fluid integrity. Each unit is fitted with ARP 568 O-rings for superior sealing. All hardware is 303 stainless steel, in most applications no gasket or sealant is required, and all Mag-Hytec parts are covered by a lifetime limited warranty. Depend on Mag-Hytec when you're pulling a heavy load.
Avoid costly reapirs - Extend the life of your Vehicle - Expand oil Capacity - Runs Cooler, Lasts Longer
|
|
- Average of double the fluid capacity
- Ease of Service
- The dipstick is knurled for quick removal, the flat is marked low/high to check lube level and a magnet, which acts as an open filter is in the lower end. The MS 7/8 - 14 THD port is large enough to use for filling.
- The magnet-filled drain plug is the same MS port as the dipstick. Both the dipstick and drain are O-ring sealed.
- The sending unit fitting is 1/8 pipe THD and shipped with a stainless pipe plug.
- The calibration plug is centered on the serial number plate and approximates the stock cover fill plug for factory fluid level.
- The O-ring is snapped into the inverted "V" groove for a positive seal without gasket or silicone.
- Plugs, cap screws and washers are stainless steel in most applications.
|
As the metallic components in transmissions and axles wear, they generate very fine particle debris that becomes suspended in the lubricating oil. A suspended magnet acts as a filter to contain these particles, keeping the fluid cleaner and extending component life. Periodic checking and cleaning of the magnet is recommended for maximum fluid service life.
MAG-HYTEC PRODUCT WARRANTY:
All Mag-Hytec products are covered by a lifetime limited warranty to the original owner against defects in parts and workmanship. O-rings are covered for five years |
|
|